Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTrusted Window Installation for Tampa Homeowners
Window installation in Tampa is a job you should only have to think about once every few decades. The cost typically runs between $450 and $1,400 per window depending on the frame material, glass package, and whether you’re dealing with a retrofit pocket install or a full-frame tear-out. We’ve been installing windows here since 2011, and we’ve seen what this climate does to underperforming units: warped sashes, failed seals, fogged glass, and frames that swell shut by August. Our crew handles every installation like it’s going on Ed Winslow’s own house, because the standard we hold ourselves to is the same one we’d want if the roles were reversed. Call (386) 559-6999 and a live person answers. That’s not a promise we make lightly. It’s just how we run things.
What Our Window Installation Service Includes
Every window we install in Tampa gets treated as part of a system, not a standalone piece of glass. We inspect the rough opening, check for moisture damage, verify the flashing and weather barrier, and only then set the new unit. Here’s what we install and when each style makes sense.
Single & Double Hung Windows
The workhorse of Florida homes, and with good reason. These windows have sashes that slide vertically, so they’re easy to clean from inside and don’t swing out into walkways or landscaping. In Tampa’s older neighborhoods like Seminole Heights and Palma Ceia, we regularly replace original double-hungs that have been painted shut for 20 years. We install units with tilt-in sashes, reinforced meeting rails, and weatherstripping rated for the humidity and salt air we get here. For a tighter air seal and an operable upper sash, double-hungs are the upgrade most homeowners go with.
Horizontal Roller Windows
Common in mid-century homes and additions across Tampa, horizontal rollers slide side to side and never need clearance outside the wall plane. That makes them ideal for windows that overlook walkways, patios, or side yards. We install rollers with stainless steel tracks, adjustable rollers for a glass-smooth glide, and interlocking meeting stiles that keep out driving rain. If yours takes two hands and a hip-check to open, the track has likely worn through, and a new installation with a properly shimmed frame is the real fix, not another round of silicone spray.
3-Panel Sliding (3-Lite Roller) Windows
A 3-Panel Sliding (3-Lite Roller) Window is really three windows in one frame: two fixed or vent panels plus a wide center opening that slides. They’re popular in Tampa great rooms and dens where you want a long stretch of glass and still need ventilation. We set these with reinforced headers and king studs sized to handle the span, because a sloppy rough opening here means a slider that binds or leaks within a year. Installation includes leveling the three-panel frame as one unit, so all three lines stay perfectly parallel to the floor and each other.
Casement Windows
Casement Windows crank out from a side hinge, and when they close, they compress against the frame seal. That compression makes them the most airtight operable window in a typical Tampa home, which matters when your AC runs nine months of the year. We install casements with multi-point locking systems and stainless steel hinge hardware that won’t corrode in coastal air. They’re a smart choice for hard-to-reach spots over kitchen sinks or counters, where the crank handle beats reaching up to lift a sash.
Awning & Hopper Windows
Awning & Hopper Windows hinge at the top and open outward; hoppers hinge at the bottom and tip inward. Both are compact, and both shed water better than almost anything else, which is why we use them in Tampa bathrooms, kitchens, and anywhere a window sits low on a wall. Because they open outward, awnings can even stay cracked open during a light afternoon shower without letting water inside. We install these with proper drip flashing along the top edge, because that’s where leaks start when the flashing gets skipped.
Picture & Fixed Windows
Fixed picture windows don’t open at all, and that’s the point. No moving parts means no air leaks, no seal failures from use, and a clean, unobstructed view. We install picture windows in combinations with casements or double-hungs across Tampa living rooms, and we’re careful about high-performance glass packages here, because a big fixed south-facing window in this sun becomes a heat pump if you cheap out on the glazing. Proper installation means the glass is square in the frame and the seals won’t be stressed from day one.
Bay & Bow Windows
Bay & Bow Windows project outward from the wall, adding square footage and a dramatic corner of light. They also require real structural work: header support, a cantilevered platform, and careful flashing at the roof line if it’s a bay with its own little roof. We’ve installed these in Tampa bungalows and new builds alike, and we pull permits and meet code on every one, because a projecting window that leaks isn’t a window problem, it’s a framing problem. We build the seat and skirt ourselves so the finished carpentry matches the room.
Garden Windows
A garden window is like a mini greenhouse that bumps out from the kitchen wall, with glass on three sides and usually a small shelf for herbs or plants. They bring in a surprising amount of light for their footprint. We install garden windows in Tampa kitchens with fully insulated glass on every face and a sloped top so water runs off instead of pooling. The trick is in the sealing: a garden window has more joints than a standard unit, and every one of them has to be flashed and caulked properly or you’ll see water inside the first summer storm.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Window Installation
We’re an authorized installer for PGT windows, the brand most Tampa homeowners ask about by name when they’re serious about hurricane protection. PGT builds impact-rated windows right here in Florida, and our crews know their installation specs cold: fastener schedules, anchor requirements, and the glazing details that make a PGT unit perform exactly like the test reports say it will. We install a lot of PGT’s WinGuard and EnergyVue lines throughout Tampa, and we order direct from the manufacturer, so there’s no middleman marking up the glass.
Mr-Glass and ViewLux round out the lineup for homeowners who want more style flexibility on the interior side. We install Mr-Glass units when the job calls for custom shapes or quick-turn replacements on standard sizes, and ViewLux when the priority is affordability without giving up a clean profile. Ed Winslow picked these brands because he’s seen how they hold up in Florida’s heat and humidity, not because a distribution agreement told him to. If you already have a quote for any of these brands, bring it in. We’ll give you a straight second opinion, free.
Whether you have PGT, Mr-Glass, ViewLux, Therma-Tru for doors, or a builder-grade brand we didn’t mention, we can handle the installation. The window matters less than the person putting it in.
Signs You Need Window Installation Right Now
- Fogged or hazy glass between the panes. When the seal on a double-pane or impact window fails, moisture gets trapped between the glass, and no amount of wiping fixes it. The insulating gas has already escaped, so the window is losing energy performance every day it stays in the wall.
- Condensation or water stains on the interior sill or wall. Water showing up inside means the frame, the flashing, or the installation from years ago has failed. In Tampa, where afternoon storms drive rain sideways, a tiny gap becomes a constant drip, and wood rot follows quietly behind the drywall.
- Windows that take real muscle to open or close. When a double-hung or slider binds, the frame has likely shifted, the balance system is shot, or the track is worn past repair. You should be able to open any window in your home with one hand. If you can’t, the window is no longer doing its job.
- Drafts you can feel with the window closed. Warm air leaking in around a closed window means the weatherstripping or the frame seal is gone. Your AC has been working against that leak every afternoon since it started, and your Tampa electric bill shows it.
- Visible cracks in the frame or gaps around the exterior. A cracked frame is more than cosmetic. It’s an entry point for water, insects, and air, and it means the window’s structural integrity is compromised, which matters when a hurricane watch gets posted and that window is now the weak point in your wall.
Our Window Installation Process - Step by Step
- 1
Free estimate and full inspection. One of our background-checked, uniformed technicians comes to your Tampa home, inspects every window you want replaced, and writes up a line-item quote with exact prices. No vague “TBD” line items, no bait pricing. You’ll know what you’re paying before you ever sign anything.
- 2
Precise measurements and ordering. We measure every rough opening ourselves, in person. That’s how we catch out-of-square openings, undersized headers, and framing issues before they become installation problems. Then we order your windows from the manufacturer with the correct size, glass package, and hardware configuration.
- 3
Careful removal and inspection of the opening. On install day, we take out the old window and inspect the framing and sill beneath it. If we find rot or termite damage, we stop and show you exactly what we found before proceeding. No hiding problems. No surprise charges you didn’t approve.
- 4
Installation to spec, flashed and sealed. We set the new window level and square, shim it properly, anchor it according to the manufacturer’s published spec, and flash the exterior with the right materials for Florida’s weather. We’re not a crew that treats caulk as a substitute for flashing. The window goes in once, and it goes in right.
- 5
Final walk-through and cleanup. Before we leave your Tampa home, you walk the job with us. We demonstrate every window, show you the seals and the hardware, and answer any question you have. We haul away the old windows and the packaging. The only thing left behind is the new glass in the wall.
How Much Does Window Installation Cost in Tampa?
A standard single-hung or double-hung window replacement in Tampa typically runs $450 to $900 per unit when it’s a pocket install that uses the existing frame. Full-frame installations, where we tear out the old frame and rebuild the opening, run $700 to $1,400 per window. Casements and awnings usually fall between $600 and $1,200 each. A big bay or bow window with structural support is a different animal, often $3,000 to $7,000 for the complete project depending on size and header requirements. Impact-rated PGT windows, which many Tampa homeowners want for storm protection and insurance credits, add roughly 20 to 35 percent over a standard non-impact unit, but they also qualify for Florida-specific insurance discounts you should factor into the math.
What shifts the price most is the condition of the rough opening. If we find rotted wood, termite damage, or an out-of-square frame, the labor and materials to fix it get added to the job. You’ll see it as a separate line item, and you’ll approve it before we touch it. The cheapest way to avoid overpaying is to get a line-item quote from a contractor who actually measured your openings, not a phone estimate based on a “typical” house. Our free estimates include exact measurements, the exact window model, the exact glass package, and a final price that doesn’t move after the work starts.
Window Installation Near Tampa - Our Service Area
We install windows throughout Tampa and the surrounding communities, including Brandon, Riverview, Wesley Chapel, Largo, Pinellas Park, Palm Harbor, Temple Terrace, Lutz, and Plant City. If you’re in St. Petersburg or Clearwater, we have dedicated pages for your area too. Ed started this company as the local alternative to the big chains, and we still operate like it: a neighbor you can call at 2 a.m. and someone will actually answer. Come see why Tampa homeowners have trusted us since 2011.
Serving Tampa, FL - Our Local Coverage Area
We’re based in the Tampa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Window Installation in Tampa
Window installation is the process of removing an old or failed window and setting a new one in its place, including the flashing, sealing, and trim work needed to keep water and air out. A pocket install fits a new window into the existing frame, while a full-frame install replaces everything down to the studs. In Tampa, proper installation matters as much as the window itself, because our storms and humidity expose every shortcut.
Most single-window installations in Tampa take 45 minutes to 2 hours per window once the old unit is out and the opening is prepped. A full-house window replacement is usually a 1 to 3 day job depending on the number of windows and whether any full-frame work is involved. We’ll give you a realistic timeline in writing before the job starts, and we show up when we say we will.
Window installation in Tampa typically costs $450 to $1,400 per window, with most standard replacements landing in the $500 to $900 range. Impact-rated units run higher, and full-frame work adds more. The best way to know your exact price is a free in-person estimate, because no two Tampa homes have identical openings. Call (386) 559-6999 and we’ll come measure in person, no obligation.
Yes, we’re an authorized PGT installer and we install their impact, WinGuard, and EnergyVue lines across Tampa. We order direct from PGT and follow their installation specs exactly, because that’s what keeps both the warranty and the performance intact. If you’re deciding between quotes, ask any contractor whether they’re authorized by the manufacturer. The answer tells you a lot.
If a window is broken, boarding is needed after a storm, or a failed unit is letting water into your Tampa home, call us right away. Our phones are answered by a live person 24 hours a day, every day. We’ll assess the situation, secure the opening if needed, and get a replacement ordered on the fastest timeline the manufacturer allows.
Every window installation we do in Tampa is backed by the 36500-Day Done Right Promise. If it’s not done right, Ed Winslow makes it right, period. Manufacturer warranties on the windows themselves are separate and vary by brand, but our workmanship guarantee doesn’t have a loophole buried in fine print. Done right the first time, or we come back.
Clear a path to the work area and move furniture, plants, and wall hangings at least three feet away from each window being replaced. Take down curtains, blinds, and anything on the sill. We’ll cover the floor with drop cloths and clean up as we go, so you don’t need to do any heavy lifting. The goal is for the only thing you notice when we leave is the new window.
Schedule Your Window Installation Service in Tampa Today
You deserve windows that open with one hand, close square, and stand up to Tampa weather for decades. Call (386) 559-6999 to schedule your free in-person estimate and get a line-item price from the local team that’s been doing this since 2011. No pressure, no vague quotes, no surprises. Just a neighbor you can call anytime, and someone who’ll actually answer. The one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Tampa since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.