Awning & Hopper Windows in Tampa, FL

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Awning & Hopper Windows in Tampa, FL

Awning and hopper windows are two of the most practical window styles for Tampa homes – they ventilate without letting Florida’s afternoon storms pour in, they fit tight spaces where a standard double-hung won’t, and when they’re impact-rated, they hold up to the same hurricane-force winds as any other opening in your house. At Winslow Windows & Doors, our Window Installation team has been installing them across Tampa since 2011, and Ed Winslow oversees every project personally. Call us at (386) 559-6999 – a real person picks up, day or night – or read on to understand exactly what these windows cost, how the install works, and whether they’re the right call for your home.

If you’re still figuring out which window type fits your renovation, start with our full Window Installation in Tampa guide – it walks through every style we install and helps you narrow down the options before we ever schedule a visit.

What Makes Awning and Hopper Windows Different

Both styles are hinged on a single side and swing open on a horizontal axis – that’s what separates them from sliding or double-hung windows. The hinge location is what sets the two apart from each other.

An awning window is hinged at the top and swings outward from the bottom. When it’s open, the glass acts like a small awning over the opening, which means rain runs off the glass rather than into your home. That makes them a natural fit for Tampa’s rainy season, when you want airflow even during a light afternoon shower. You’ll typically find them above kitchen sinks, in bathrooms, in bedrooms where the window needs to stay open overnight, or stacked below a large fixed picture window or Garden Windows to add ventilation without breaking the view.

A hopper window is the inverse: hinged at the bottom, it swings inward from the top. Because they tilt into the room, hoppers are almost always installed in spaces where you need ventilation but have no room to swing the sash outward – basement windows, bathroom windows set high on a wall, and utility rooms. In Tampa that often means garage bathrooms, in-law suite additions, and the occasional older bungalow in Seminole Heights or Hyde Park where the original window openings are narrow and low.

Both styles seal tightly when closed – the compression fit around the perimeter is one of the reasons they outperform sliding windows on air infiltration ratings. For Tampa homeowners paying to run the air conditioning ten months out of the year, that seal matters on the energy bill.

When You Need Awning or Hopper Windows

• Your bathroom or kitchen has no real ventilation. Tampa’s humidity turns a poorly vented bathroom into a mold problem faster than almost anywhere else in the country. An awning or hopper window can vent moisture without requiring a clear exterior swing path or a large rough opening.
• You want to leave a window open during rain. In South Tampa and the neighborhoods around Bayshore, afternoon pop-up storms are a daily summer ritual. An awning window opened even a few inches keeps air moving without letting rain reach the sill or the floor below.
• The window opening is unusually short or wide. Lots of Tampa concrete block homes built in the 1960s and 1970s have openings that were designed around jalousie windows. When those get replaced, awning or hopper configurations are often the cleanest fit without reworking the rough opening.
• You’re adding ventilation to a space that doesn’t have a direct exterior wall. Hoppers are the standard choice for utility rooms, laundry closets, and garage-adjacent bathrooms in Westchase, Carrollwood, and similar planned communities where the floorplan was never designed with natural light in mind.
• Your current windows fail the palm-of-hand test every summer. Stand next to a closed window during a hot July afternoon. If you can feel warm air pushing through around the frame, the seal is gone. Awning and hopper windows – especially newer vinyl-framed units from ES Windows or ECO Window Systems – seal tight enough that this test should feel neutral.
• You need impact-rated glass in an awkward location. Florida building code requires impact-rated or protected openings in all habitable rooms. That requirement doesn’t get waived because a window is small or oddly shaped. Awning and hopper units are available in impact configurations, and we install them to meet Hillsborough County permitting standards.

Our Awning & Hopper Windows Process

1. In-home measurement and assessment. One of our background-checked, uniformed technicians visits your Tampa home to measure each opening precisely, check the condition of the existing frame and surrounding stucco or siding, and flag anything that would affect the install – rot, previous water intrusion, or an opening that isn’t plumb. There’s no trip charge for homes in our home county. This visit is also when we talk through glass options: standard insulated, low-E coated, or impact-laminated if your permit or insurance requires it.
2. Upfront written quote. We send you a line-item estimate before anything is ordered. No vague totals, no “we’ll figure out the rest when we’re on-site.” If you have a competing written estimate from another Tampa contractor, bring it – our second-opinion review is free and we’ll tell you honestly whether the other quote is fair.
3. Permit and product ordering. Most window replacements in Hillsborough County require a permit if the window size or configuration is changing. We pull the permit on your behalf, order the windows from our authorized brands, and schedule the install once the product arrives – typically within the manufacturer’s lead time for that series.
4. Removal and installation. We remove the existing window, inspect the rough opening and sill, and install the new unit with the flashing and sealant detail that Tampa’s wind-driven rain demands. Awning windows in particular need the exterior sill seal done correctly – water that gets behind a poorly flashed awning window finds the interior framing quickly in our climate.
5. Inspection and cleanup. We walk every installed unit with you before we leave – demonstrating the hardware operation, confirming the locking mechanism engages cleanly, and checking the crank or tilt mechanism on each sash. The job site is cleaned the same day.
6. 36500-Day Done Right Promise. If something isn’t right – a seal that fails, a crank that loosens, a flashing detail that wasn’t caught on the walk-through – we come back and make it right. That promise doesn’t have an expiration date written in the fine print; it’s the standard Ed Winslow holds every job to.

Awning & Hopper Windows Pricing in Tampa

Awning and hopper window costs in Tampa run across a meaningful range depending on size, glass type, frame material, and whether impact-rated glazing is part of the spec. Here’s an honest look at what homeowners typically pay in this market:

These figures cover supply and installation in the Tampa market as of 2025-2026. A few things push the number up or down:

• Frame condition. If the rough opening has rot or previous water damage – common in Tampa homes that sat through multiple hurricane seasons with inadequate flashing – remediation adds cost. We flag this at the assessment, not mid-install.
• Glass specification. Impact laminate costs more than standard insulated glass, but in many Hillsborough County locations it’s required either by permit or by your homeowner’s insurance carrier. We can pull your permit requirements before you commit.
• Number of windows. Multi-window projects reduce the per-unit cost because mobilization and permitting are shared across more openings. Replacing four bathroom awning windows at once will cost less per unit than replacing one.
• Permit fees. Hillsborough County permit fees are a pass-through on your invoice – we don’t mark them up, and we show you the exact fee on the estimate.

If your project total exceeds $200 in repair work, our standing $40 off any repair over $200 discount applies automatically. Seniors and veterans receive a permanent 10% discount on any project. Call (386) 559-6999 for a free in-home estimate – pricing is locked in writing before a single window is ordered.

FAQs – Awning & Hopper Windows in Tampa

Are awning windows better than double-hung windows for Tampa’s humidity and rain?

For certain locations, yes – awning windows outperform double-hung windows specifically because they can stay open during light rain. The outward-swinging sash deflects water away from the opening, while a double-hung window left open in a Tampa afternoon shower will soak the sill and floor underneath. Like Casement Windows, awning windows also tend to seal tighter when closed because the crank mechanism pulls the sash firmly against the perimeter weatherstrip – a real advantage for air conditioning efficiency in a climate where the AC runs most of the year. That said, double-hung windows offer easier cleaning from inside and suit different room types. If you’re unsure which style fits a specific opening, call us at (386) 559-6999 and we’ll walk through it with you at no charge.

Do awning and hopper windows need to be impact-rated in Tampa?

Florida’s building code requires that all habitable room windows either be impact-rated or have an approved storm protection system like accordion shutters or panels – and Hillsborough County enforces this consistently. When you’re replacing an existing window with a new one, the permit process will specify what’s required for your address and construction type. We handle the permit research as part of our process, so you won’t be surprised mid-project. Impact-rated awning and hopper units are available from brands like ES Windows and ECO Window Systems in configurations that meet Miami-Dade and Florida product approval standards. Call (386) 559-6999 and we can confirm your specific requirements before you spend a dollar.

How long does it take to install awning or hopper windows in a Tampa home?

A straightforward single-window replacement – no frame damage, standard rough opening – typically takes two to four hours for one of our install teams. A bathroom with two or three windows can usually be done in a half-day. Larger projects with multiple windows throughout the house are typically completed in one full day, occasionally two if there’s significant frame work involved. The permit timeline adds days to the schedule, not the install itself – we account for that when we give you the project schedule after your estimate. We don’t schedule installs and then tell you a permit is still pending; everything is confirmed before our trucks show up.

What’s the difference between awning and hopper windows – and which one should I choose?

Awning windows hinge at the top and swing outward; hopper windows hinge at the bottom and swing inward. The practical difference is installation context. If you have wall space outside the window and want airflow during rain, awning is the right call. If the window is in a tight interior space – a high bathroom window, a utility room, or a narrow opening in an older Tampa bungalow – the inward swing of a hopper is usually the better fit. In Tampa homes specifically, we see awning windows used most often in kitchens, master baths, and bedrooms, while hoppers show up in secondary bathrooms, laundry rooms, and the older concrete block homes in neighborhoods like Seminole Heights and Ybor City where window openings were designed around different hardware, unlike the larger openings suited to Bay & Bow Windows. When you call us for a measure, we’ll tell you exactly which style works for each opening and why.

Why Tampa Homeowners Choose Winslow Windows & Doors

Ed Winslow started this company in 2011 because he saw too many Tampa homeowners get burned by contractors who disappeared after the deposit cleared. His name is on the business – on every truck, every estimate, and every job we do – and that means accountability isn’t a policy, it’s personal.

We’re authorized installers for brands including ES Windows, ECO Window Systems, and Mr-Glass, which means we’re not guessing at product specs or installation requirements. We know the tolerances these windows are built to and we install to match them. When a manufacturer’s rep visits a job site to audit an installation, ours pass.

The 36500-Day Done Right Promise exists because “done right” can’t have a loophole. If something isn’t right on a window we installed – this year or years from now – we come back and fix it. No finger-pointing at the manufacturer, no service-call fee to diagnose a problem we created. That’s the standard Ed holds, and it’s why homeowners in South Tampa, Carrollwood, Westchase, and across the greater Tampa area keep calling us back for their next project.

Every technician who visits your home is background-checked and arrives in uniform. You’ll know who’s coming before the truck is in your driveway. And when you call (386) 559-6999 at any hour – six in the morning, ten at night – a real person answers. Not a voicemail. Not a callback form. A person.

For a broader look at everything we install, visit the Winslow Windows & Doors home page – you’ll find our full service list, credentials, and how to reach us.

Key Takeaways

• Awning windows hinge at the top and swing out; hopper windows hinge at the bottom and swing in – each style suits different spaces and ventilation needs.
• Both styles are available in impact-rated configurations that meet Hillsborough County and Florida building code requirements.
• Installed costs in Tampa typically run $300-$1,100 per window depending on size, glass type, and impact rating.
• Winslow Windows & Doors pulls permits, handles the installation, and backs every job with the 36500-Day Done Right Promise.
• Seniors and veterans receive a permanent 10% discount; any repair project over $200 gets $40 off automatically.
• Someone answers the phone at (386) 559-6999 every hour of the day – no voicemail, no forms, no callbacks required.

Get a Free Estimate on Awning or Hopper Windows in Tampa

If you’re ready to add better ventilation, tighter seals, or impact-rated glass to your Tampa home, call (386) 559-6999 today. We’ll schedule a free in-home measurement, walk you through your options, and deliver a written estimate with line-item pricing before anything is ordered. Upfront pricing, no surprises on the invoice, and a promise that the job gets done right – or we come back. That’s what Ed Winslow has stood behind since 2011, and it’s not changing.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Tampa since 2011.