Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
After3-Panel Sliding (3-Lite Roller) Windows in Tampa, FL
A 3-panel sliding window – also called a 3-lite roller – gives you three panes side by side, with the center pane fixed and the two outer panels sliding on a track to open from both ends. It’s the go-to choice for wide wall openings in Tampa homes where you want maximum glass area, cross-ventilation from two directions, and a clean horizontal profile that works with both older Florida ranch-style construction and newer coastal builds. If you’re replacing an oversized Casement Windows setup or a tired jalousie bank, this configuration handles the span without the structural gymnastics a single large frame would require.
At Winslow Windows & Doors, we’ve been installing 3-lite rollers across Tampa since 2011, and Ed Winslow signs off on every job personally. Whether you’re upgrading an existing opening or framing new construction, our team handles measurement, permitting, product sourcing from brands like ES Windows and ECO Window Systems, and the final installation – all under the same license and the same promise. Call us at (386) 559-6999 any time; a live person picks up around the clock. And if you want to see how 3-panel sliding windows fit into a broader home upgrade, our full Window Installation in Tampa page walks through every option we carry.
When You Need 3-Panel Sliding (3-Lite Roller) Windows
- You have a wide opening that needs real ventilation. Tampa’s humidity from June through September means stagnant indoor air is a genuine comfort problem. A 3-lite roller lets you slide both outer panels simultaneously, pulling a cross-breeze through openings that a single sliding sash simply can’t match.
- Your current windows are original jalousies or louvered glass. Homes in Seminole Heights, Riverside Heights, and parts of Old Seminole Heights were built in the 1950s and 1960s with jalousie windows. Those frames offer almost zero energy efficiency and even less impact resistance. A 3-lite roller in the same rough opening modernizes the look and meets current Florida Building Code in one step.
- You’re dealing with a wide opening and limited wall depth. Unlike casements that swing outward – which can conflict with a covered lanai or a porch column – sliding panels stay in-plane with the wall. For Tampa pool enclosures and screened lanais, that’s often the deciding factor.
- You need impact-rated glass but want to keep the view. In Tampa’s wind-zone designations, especially in Hillsborough County coastal corridors, impact glazing isn’t optional in many rebuild scenarios. A 3-panel unit in impact-rated laminated glass from a brand like ECO Window Systems gives you hurricane protection without shrinking your sight line.
- Your existing 3-lite unit is leaking air or sticking on the track. Worn rollers, corroded aluminum frames, and failing weatherstripping are common after 15-plus years of Florida sun exposure. If the panels are hard to slide, drafty, or fogging between panes, replacement is almost always more cost-effective than repair on units older than 2009.
- You’re remodeling and the opening size is changing. Kitchen pass-throughs, great room expansions, and guest suite additions in neighborhoods like Carrollwood and New Tampa frequently call for a custom-width 3-lite configuration because the opening won’t conform to standard single or double-hung sizing.
Our 3-Panel Sliding (3-Lite Roller) Windows Process
- Free on-site measurement and consultation. We come to your Tampa home, measure the rough opening precisely, and check the surrounding wall construction – wood frame, concrete block, or CBS hybrid, all of which affect how we anchor the frame. We look at the wall depth, the interior trim situation, and whether the existing header can carry the span load. You get a written, itemized quote before we leave. No trip charge inside Hillsborough County.
- Product selection and permit filing. Based on your opening dimensions, budget, and any HOA or historic-district requirements (relevant in parts of Hyde Park and Ybor City), we specify the right unit from our authorized lineup. ES Windows and ECO Window Systems both manufacture Florida-approved 3-lite rollers in sizes up to 144 inches wide and in impact and non-impact configurations. We pull the permit with Hillsborough County Building Services – you never have to touch that paperwork.
- Removal of the existing window. Our background-checked, uniformed crew removes the old unit carefully, checking the rough opening for rot, efflorescence in the block, or frame damage that needs to be addressed before the new window goes in. In Tampa’s climate, moisture intrusion around old aluminum frames is common, and we don’t cover problems up – we fix them first.
- Frame preparation and installation. We apply the correct flashing tape and sealant for Florida’s wind-driven rain conditions, set the new frame square and plumb, and fasten it per the manufacturer’s installation instructions and county code requirements. For impact-rated units, the fastener pattern and embedment depth into CBS block are non-negotiable – those specs exist for a reason, and we follow them exactly.
- Panel hanging and roller adjustment. The sliding panels are hung on the track, the rollers are adjusted for smooth, even travel, and the locks are tested from both inside and outside. A panel that rides even a few millimeters off-plumb will develop weather-seal gaps within a season. We verify operation before we pack up.
- Final inspection and sign-off. We walk through the finished install with you, show you how to clean and lubricate the track (a simple annual step that adds years to roller life in Tampa’s salt-air environment), and leave you with the warranty documentation for both the product and our labor. The county inspector signs off on permitted work, and Ed’s name is on the job from start to finish.
3-Panel Sliding (3-Lite Roller) Windows Pricing in Tampa
In Tampa’s current market, installed pricing for a 3-panel sliding window runs roughly $850 to $2,400 per unit, depending on size, glass specification, and frame material. That’s a wide range, and the variables that move the number are worth understanding before you call anyone for a quote.
| Configuration | Typical Installed Range (Tampa Market) |
|---|---|
| Standard aluminum, non-impact, up to 72″ wide | $850 – $1,150 |
| Standard aluminum, non-impact, 72″ – 120″ wide | $1,100 – $1,550 |
| Impact-rated laminated glass, aluminum frame, up to 96″ wide | $1,400 – $1,900 |
| Impact-rated, wide-span (96″ – 144″), premium frame | $1,800 – $2,400 |
| Block-infill or rough-opening modification required | Add $200 – $600 per opening |
A few factors that push the number toward the high end in Tampa specifically:
- Impact glass requirements. Hillsborough County’s wind-zone maps put portions of South Tampa, Apollo Beach, and Westchase in zones where impact glazing is required for new installations or permitted replacements. Laminated impact glass adds $300-$600 over standard low-E glass on a wide unit.
- CBS block construction. The majority of Tampa homes built before 1990 are concrete block. Anchoring into block correctly requires hammer-set fasteners and, in some cases, an outrigger fin frame. The labor time is longer than wood-frame work.
- Custom sizing. Standard 3-lite rollers run in incremental sizes. An opening that falls between catalog sizes – common in older Tampa homes where contractors built to suit – means a custom-order unit, which adds lead time and 10-15% to product cost.
- Frame color and finish. Standard mill-finish aluminum is the baseline. Bronze, white, and custom powder-coat finishes, popular in the historic districts and newer planned communities like Westchase and FishHawk Ranch, add a modest premium.
Every estimate from Winslow Windows & Doors is upfront and itemized – you see the product cost, the labor, and the permit fee as separate line items. No surprises on the invoice. Seniors and veterans receive a permanent 10% discount on all services, and if your project includes any repair work over $200, we take $40 off that portion automatically. Call (386) 559-6999 for a free on-site estimate; there’s no trip charge inside Hillsborough County.
FAQs – 3-Panel Sliding (3-Lite Roller) Windows
How much does a 3-panel sliding window cost in Tampa?
Installed pricing in Tampa typically runs from $850 for a standard non-impact unit under 72 inches wide up to $2,400 for a wide-span impact-rated configuration in a CBS block wall. The biggest cost drivers are glass specification (impact vs. standard low-E), opening width, and whether the rough opening needs modification. Call (386) 559-6999 and we’ll give you an exact written quote at no charge – no trip charge inside Hillsborough County.
Do 3-lite roller windows meet Florida hurricane codes in Tampa?
They can, but it depends on the product specified. A standard 3-lite roller with single-strength or even double-pane non-laminated glass does not meet impact requirements. For homes in Hillsborough County coastal wind zones, the unit must carry a Florida Product Approval number and use laminated, impact-rated glass – both of which we verify before ordering. Brands like ECO Window Systems manufacture 3-lite rollers with current Florida Product Approvals specifically engineered for Tampa’s wind load requirements. We pull the permit and handle the inspection so you know the install is code-compliant.
Can a 3-panel sliding window replace an existing jalousie window without changing the opening size?
Usually yes, and it’s one of the most common projects we do in Tampa’s older neighborhoods. Jalousie frames in homes from the 1950s and 1960s typically sit in a poured or block opening that adapts well to a modern aluminum 3-lite roller. In most cases we can match the rough opening dimension closely enough that no block cutting or infill is needed, which keeps cost down and installation time to a single day. We measure the opening at the free estimate visit and confirm fit before we order anything.
How long does installation take for a 3-panel sliding window?
A single 3-lite roller installation in an existing opening takes two to four hours for our crew. If we’re replacing multiple units in one visit – common in kitchen and living room combinations in Carrollwood or Westchase homes – a four- to six-unit job is typically complete in a full day. Custom-sized units ordered to a non-standard width have a lead time of two to four weeks from approved permit, and we’ll give you a specific window once our Window Installation services team orders the product. The county inspection is scheduled by us after installation and usually occurs within a few business days.
Why Tampa Homeowners Call Winslow First
Ed Winslow started this company in 2011 with a straightforward idea: do the work right, stand behind it, and be reachable when something comes up. Fifteen years later, that’s still how we operate. Our 36500-Day Done Right Promise means exactly what it sounds like – if the installation isn’t right, we come back and fix it. Not in the fine print, not with caveats. Ed’s name is on the business, and his name is on every job we complete in Tampa.
We’re authorized to install products from ES Windows, ECO Window Systems, Mr-Glass, and five other premium manufacturers, which means we can match the right product to your opening, your code requirements, and your budget rather than steering you toward whatever we happen to stock in a warehouse. We also specialize in Awning & Hopper Windows for unique ventilation needs. Every technician who arrives at your home has been background-checked and arrives in uniform – you know who’s at your door before the truck pulls in the driveway.
When you call (386) 559-6999, a live person answers. Not a voicemail. Not a callback queue. Someone who can schedule your free estimate, answer a question about your existing unit, or connect you with Ed directly if the situation calls for it. That’s true at 8 a.m. on a Tuesday and at 11 p.m. on a Friday.
Our published address and license number aren’t fine print – they’re front and center, because any contractor unwilling to put their name and license on their work is telling you something. We’ve built this business one Tampa homeowner at a time, from Seminole Heights to South Tampa to New Tampa, and we plan to be the company you call ten years from now when you have a question about the windows we installed today.
For seniors and veterans, a permanent 10% discount applies to every service we provide – no expiration, no hoops to jump through. And if you’ve already received a written estimate from another contractor, we’ll give you a free second opinion so you can compare apples to apples.
Key Takeaways
- 3-panel sliding (3-lite roller) windows are the practical choice for wide Tampa openings where cross-ventilation, large glass area, and in-plane operation all matter.
- Installed pricing in the Tampa market runs $850 to $2,400 depending on size, glass type, and wall construction – impact-rated units for coastal Hillsborough County zones sit toward the higher end.
- Winslow Windows & Doors handles permits, product selection from authorized brands like ES Windows and ECO Window Systems, installation, and county inspection – one call covers the whole job.
- The 36500-Day Done Right Promise backs every installation: if it’s not right, Ed makes it right.
- No trip charge inside Hillsborough County. Free written estimates. Live phone answered 24/7 at (386) 559-6999.
- Seniors and veterans receive a permanent 10% discount on all work.
Ready for a Free Estimate on 3-Panel Sliding Windows in Tampa?
If you’re looking at a wide opening, a tired jalousie bank, or a 3-lite roller that’s seen one too many Tampa summers, give us a call. We also install Bay & Bow Windows for homeowners seeking dramatic views and extra interior space. We’ll come out, measure the opening, check the wall construction, and hand you a written itemized quote – no pressure, no trip charge inside Hillsborough County, and no surprises later. Call Winslow Windows & Doors at (386) 559-6999 any time of day or night. Ed’s word is behind every window we install, and we’re not going anywhere.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Tampa since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.