Entry Doors

Entry Doors in Tampa, FL | Winslow Windows & Doors

An entry door does two jobs in Tampa. It welcomes people in, and when a storm rolls through, it has to stand up to wind and debris that would turn a standard door into a liability. The Entry Doors we install are Therma-Tru fiberglass and steel systems built around that second job. They’re impact-rated, they look like a proper front door, and they come factory-finished or paint-grade depending on how much customization you want. Winslow Windows & Doors has installed these across Tampa, from Davis Islands to Westchase to Seminole Heights, and we pull permits, set the door level and square, and seal it to hold. Call (386) 559-6999 for a free on-site measurement.

Call (386) 559-6999

Product Overview - Entry Doors

This is the door profile Tampa homeowners gravitate toward when they want hurricane protection without the look of a fortress. The slab itself is fiberglass or steel, depending on the configuration you choose. Fiberglass gives you a realistic woodgrain texture and holds paint well. Steel gives you a slimmer profile and a heavier feel when it closes. Both are engineered to accept an impact-rated glass insert or to run as a solid panel with no glass at all.

What separates these from a stock door at a big-box store is what happens when wind pressure builds. The frame, the slab, the glass, and the hardware are tested as a system. That matters, because a door is only as strong as the weakest connection between those four parts. We see doors in older Tampa homes where the slab is fine but the frame flexes under pressure and the deadbolt loses its throw. That’s the kind of failure this system is designed to prevent.

Architecturally, the door works on a range of Florida styles. It suits the Mediterranean and Spanish Revival homes in South Tampa and Hyde Park, the Key West-inspired builds near Bayshore, and the newer construction in New Tampa and Riverview. You can run it as a clean solid panel, or add a decorative glass insert for light in the foyer. Either way, it reads as a front door first and a storm-rated product second. That’s the point.

Technical Specifications

Here’s what the Entry Doors product line covers. Specific configurations get confirmed on your written quote, because we match the door to your opening and your wind zone.

• Frame materials: Fiberglass, Steel
• Maximum width: Up to 48 inches wide
• Glass options: Decorative Impact Glass Insert, Low-E Insulated Glass Insert, No Glass (Solid Panel)
• Finish options: White, Black, Bronze, Paintable Woodgrain Finish
• Design pressure: Matched to your wind zone, up to +/-100 PSF maximum. We never specify a higher design pressure than the wind zone calls for.
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration. Engineered to Florida Building Code High-Velocity Hurricane Zone requirements.
• Hardware prep: Standard bore for knob or lever, deadbolt prep included.
• Sill: Thermally broken, low-threshold option available for accessible entries.

Hurricane & Compliance Performance

These are the six performance areas that determine whether an entry door actually holds up in a Tampa storm. Each one is configured on your quote.

Laminated Impact Glass

When glass is included, it’s laminated with a PVB (polyvinyl butyral) interlayer. Under impact, the glass may crack, but the interlayer holds it in the frame. That prevents wind and rain from entering the home after a strike.

Miami-Dade NOA / Florida Product Approval

Each configuration carries a Miami-Dade Notice of Acceptance and Florida Product Approval number. These are issued per configuration, not blanket. We verify the exact approval on your specific quote.

FBC/HVHZ Compliance

The system is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That’s the stricter of the two wind zones Florida recognizes, and it applies to most of Tampa’s coastal and near-coastal neighborhoods.

TAS 201 / 202 / 203 Testing Context

HVHZ-rated products are tested under the TAS protocol family. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. The door is designed to pass that suite, not just a single test.

Design Pressure Matched to Your Wind Zone

Design pressures are matched to your wind zone, up to +/-100 PSF and never higher. We don’t over-specify a door for a zone that doesn’t require it, and we don’t under-specify one for a home on the water.

Energy Performance

Low-E and insulated glass options are available for energy performance. On a west-facing Tampa entry that gets afternoon sun, Low-E makes a noticeable difference in how hot the foyer gets.

Color & Glass Options

The finish and glass decisions drive the look of the door. White and Black are the two most common choices in Tampa. White works on newer construction in Westchase, Fishhawk, and the subdivisions around Citrus Park. Black has a stronger presence and shows up a lot on modern and farmhouse-style remodels in Seminole Heights and St. Pete. Bronze is the quiet middle ground: it reads as upscale without being flashy, and it hides dirt well on a door that faces a busy street.

The Paintable Woodgrain Finish is for homeowners who want a custom color with the texture of real wood. You can paint it any color Sherwin-Williams or Benjamin Moore makes, and the woodgrain pattern keeps it from looking plastic.

On the glass side, the Decorative Impact Glass Insert gives you light and a design element while keeping the impact rating. The Low-E Insulated Glass Insert is the energy play, good for doors that catch direct sun. The solid panel is the simplest and often the most energy-efficient option, since there’s no glass to conduct heat.

Installation by Winslow Windows & Doors in Tampa

We install these doors ourselves, with our own crews. That’s worth stating plainly, because an NOA-rated door installed badly is not any stronger than a standard door installed badly. The product approval covers the door as a system. The installation determines whether that system performs.

Our process starts with a pre-install inspection. We measure the rough opening, check the condition of the framing and the subfloor, and look at how the existing door was flashed. In older Tampa homes, especially bungalows in Seminole Heights and Riverside Heights, we often find rot at the threshold or the king studs that has to be addressed before the new door goes in.

From there, we set the door level, plumb, and square. That sounds basic, but a door that’s out of square by a quarter inch will bind, leak air, and wear its hardware prematurely. We shim the frame at the hinge and lock points, then secure it to the rough opening with a fastener schedule appropriate for the wind zone.

The perimeter gets sealed with AAMA 812 low-expansion foam; the sill gets a continuous sealant bead. We install per AAMA 2400/2410 standard practice for exterior door installation, which covers flashing, sealing, and integration with the weather-resistant barrier. In an HVHZ jurisdiction, that flashing detail is part of what your inspector is checking.

After the door is set, we run a water test along the sill and the head jamb. Then we clean up and walk you through the operation of the door and hardware. We also handle the permitting conversation: Tampa’s in an HVHZ region, and most entry door replacements require a permit. We know what the building department wants to see, and we don’t skip it.

Coastal exposure matters. A door on Davis Islands sees different wind pressure than a door in Lutz. We match the configuration to your wind zone, not a one-size-fits-all spec.

Frequently Asked Questions - Entry Doors

Get a Quote - Entry Doors in Tampa

If you’re replacing a front door in Tampa, we’ll measure your opening, confirm your wind zone, and put together a written line-item quote with the exact configuration. No change orders down the line, no pressure to decide on the spot. Call Winslow Windows & Doors at (386) 559-6999 to schedule your free on-site measurement.

Written by the team at Winslow Windows & Doors, serving Tampa, FL.