Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterMr-Glass Roof Replacement & Installation in Tampa: What to Know First
As an independent Mr-Glass service provider, Winslow Windows & Doors handles roof replacement and installation for Tampa homes with Mr-Glass skylights, roof glazing, and structural glass panels. Most Mr-Glass roof work in Tampa runs $850 to $4,200 depending on panel size, pitch, and whether we’re replacing one unit or re-glazing an entire system, with most jobs finished in one to two days. You’ll get a written line-item quote before we start, not a ballpark. If you own a Mr-Glass product and the roof around it is failing or the glass itself is compromised, call (386) 559-6999 and Ed Winslow or one of our techs will walk you through what you’re seeing.
Key Takeaways
- We’re an independent installer, not a Mr-Glass factory rep, so we recommend what’s actually best for your roof, not what moves a manufacturer’s inventory.
- We stock common Mr-Glass sealants, flashing kits, and glazing gaskets in our Tampa shop, which shortens the wait on most jobs.
- Every Mr-Glass roof replacement carries our 36500-Day Done Right Promise: if it’s not done right, we make it right.
How Mr-Glass Products Fail, and How We Fix Them
Mr-Glass roof units see a specific set of failures in Tampa’s climate. We’ve been called out for all of these, some of them more times than we can count. Here’s what we typically find and what we do about it.
- Seal failure on Mr-Glass Solarium Series panels. The insulated glass units in the Solarium line use a perimeter seal that breaks down under sustained UV and thermal cycling. Tampa’s wet season pushes moisture into the air gap, and homeowners notice permanent fogging that never clears. The fix is a full IGU replacement, not a seal patch. We order the correct Mr-Glass thickness spec and set the new unit with fresh setting blocks and silicone rated for high-movement roof applications.
- Flashing separation on Mr-Glass Series 4000 curb-mounted units. The Series 4000 often sits on a site-built curb, and the original installer may have used a generic flashing detail that doesn’t move with the roof deck. After a few Tampa summers, the flashing lifts at the corners and water finds the gap. We strip the old flashing, inspect the curb for rot, rebuild it if needed, and reflash with soldered corners and a continuous membrane tie-in. That’s the repair that actually holds.
- Weep system clogging on Mr-Glass SkyVault frames. SkyVault frames rely on small weep channels to drain condensation and wind-driven rain. Oak pollen, dust, and the muck from Tampa’s afternoon storms plug those channels, and water backs up into the interior. We pull the glaze stops, clean the entire weeper run, and in some cases enlarge the outlets slightly, which is a known fix for the older production years.
- Stress cracks in Mr-Glass sloped glazing from improper shimming. We see hairline cracks radiating from the corners of sloped Mr-Glass panels, and nearly every time the original glazing shims were placed wrong or the panel was torqued into an out-of-square opening. The crack is a symptom. We remove the panel, square the opening, reset with Mr-Glass spec’d durometer shims, and the new panel seats without stress. Done once, done right.
- Failed gaskets on Mr-Glass operable roof vents. The operable vent units wear out their perimeter gaskets faster in coastal air. Salt and heat bake them rigid, they lose compression, and the vent leaks under wind-driven rain even when closed. We pull the sash, replace the gasket with an OEM matching profile or a performance equivalent, and test with a hose under full pressure before we call it done.
Our Mr-Glass Roof Replacement & Installation Process
Here’s how a Mr-Glass job goes at Winslow Windows & Doors, from your first call to the final walkthrough.
- 1
You call (386) 559-6999. A live person answers, 24/7. No menu tree, no voicemail. You describe the Mr-Glass unit and what it’s doing.
- 2
We schedule a site visit at a time that works for you. There’s no trip charge inside our home county. If you already have a written estimate from someone else, we’ll give you a free second opinion on it.
- 3
Ed or a senior tech inspects the roof and the Mr-Glass unit. We check the glass, the seals, the flashing, the curb, the weepers, and how the surrounding roof drains. You get a plain-English explanation of what failed and why.
- 4
We write a line-item quote with OEM and aftermarket parts options where they exist. No change orders, no surprise line items later. The price we quote is the price you pay.
- 5
We do the work, pull any permits the job requires, and pass the inspection. Our techs are background-checked and in uniform.
- 6
We test, we walk you through the job, and we leave the site clean. Then the 36500-Day Done Right Promise kicks in for as long as you own the home.
What Mr-Glass Roof Replacement & Installation Costs in Tampa
| Mr-Glass Scenario | Typical Tampa Price Range |
|---|---|
| Single skylight IGU replacement (fogged Solarium panel) | $850 – $1,400 |
| Series 4000 curb reflash and seal (no glass replacement) | $600 – $1,100 |
| SkyVault weeper system clean and glaze stop reset | $350 – $700 per unit |
| Full sloped glazing panel replacement with squaring and shims | $1,800 – $3,200 |
| Complete Mr-Glass roof system re-glaze on a mid-size sunroom | $3,000 – $4,200 |
What moves the price: roof pitch and access, whether the curb needs rebuilding, glass size and thickness, and whether you choose OEM or a performance-equivalent aftermarket part. We show you both options when they exist and explain the trade-off honestly. Call (386) 559-6999 for a written, line-item quote. Estimates are free, and we stand by the number.
Why Tampa Homeowners Call Winslow Windows & Doors for Mr-Glass Work
We’ve been doing this since 2011, and Ed Winslow’s name is on the company. Literally. My name is on the door, and that means when a Mr-Glass roof job goes out from our shop, it goes out right or we come back and make it right. That’s the 36500-Day Done Right Promise, and it’s not a warranty pamphlet, it’s how we operate. We service eight premium brands including PGT, CGI, CWS, and ES Windows, so when a Tampa home has mixed-brand glass, we can address the whole roof envelope, not just the Mr-Glass unit. Live person answers every call, every hour. Background-checked techs, uniformed, driving marked trucks. Published address, license number on the website. You know who’s coming before the truck pulls up.
FAQs
No, not automatically. Mr-Glass warranties on the replacement panel depend on using a unit that meets the original spec. We source Mr-Glass matching IGU thickness, coating, and spacer specs, and our installation practices stay within the warranty-safe envelope. We’ll walk you through exactly what we’re ordering and where it stands before you approve anything. Call (386) 559-6999 if you have a warranty question today.
Most single-panel Mr-Glass replacements run one day, and a full re-glaze on a mid-size sunroom typically takes two days. Weather can stretch that, since we won’t pull a roof panel with a storm rolling in. We’ll give you a firm schedule when we quote the job.
It depends on the failure. Failing sealant or a flashing issue is often repairable. Fogged IGUs, stress-cracked panels, and failed gaskets usually mean replacement. We’ll tell you which one you have and won’t sell you a new panel if a repair is the right call. That’s the whole point of the free estimate, so call (386) 559-6999 to get it scheduled.
We use both, and we show you the price difference. OEM Mr-Glass parts keep everything factory-matched. Quality aftermarket glazing gaskets and sealants are sometimes a smarter buy. We recommend based on what’s on your roof and how long you plan to stay in the house, and the decision is yours.
That’s common in Tampa and you don’t need two companies. We’re authorized for PGT, CGI, CWS, ES Windows and more, so we can bring the whole envelope to a single standard. One crew, one warranty, one owner to call if anything ever goes wrong.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Tampa and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.