Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterMr-Glass Roof Repair in Tampa: What to Know First
Mr-Glass roof repair in Tampa usually means fixing the glass panels, flashing, or frame seals on a skylight or glass roof section, and most jobs run between $380 and $1,400 depending on what failed. We’re an independent Mr-Glass service provider, which means we fix the product honestly without being tied to a manufacturer’s script, and most repairs are completed in a single visit. If you own a Mr-Glass skylight, sunroom roof, or glass deck panel anywhere in Tampa and it’s leaking, fogged, cracked, or rattling, call (386) 559-6999 and a live person will answer.
How Mr-Glass Products Fail - and How We Fix Them
- Frame gasket compression on Mr-Glass Series 420 skylights. Tampa’s heat cycles, especially the brutal July-to-September stretch, cause the original EPDM gaskets on Series 420 units to compress and harden years early. The glass stays fine, but water finds the gap. We replace the gasket with a UV-stabilized compound rated for coastal Florida exposure, not the OEM rubber that failed the first time.
- Flashing separation on Mr-Glass sunroom roof transitions. We regularly see failures where the Mr-Glass roof ties into a shingle or tile field. The original installer used a single layer of peel-and-stick flashing, and after a few Tampa downpours, water wicks under the lap. We pull the affected shingles or tiles, install a double-layered transition with soldered corners, and retest with a hose before sealing anything back up.
- Condensation between panes on Mr-Glass Panorama units. Fogging between the glass means the insulated seal has gone, not the frame. On Panorama line panels, the argon fill escapes slowly over time. We can often replace the individual IGU instead of the whole panel section, which saves hundreds over a full skylight swap. The customer pays for the glass unit and the labor, not for a complete teardown they don’t need.
- Cracked outer lites from windborne debris during Tampa’s summer squalls. Mr-Glass tempered lites are durable, but a branch or a piece of roof tile launched by a 50 mph gust will crack the outer pane. When the inner lite is intact, we replace just the outer tempered panel and reglaze the frame. It’s a same-visit fix in most cases and keeps the unit’s original insulation intact.
- Weep hole blockage on Mr-Glass Series 300 roof vents. Owners call about water pooling around the base of a Series 300 vent and assume the seal failed. Nine times out of ten, the weep holes are clogged with Tampa pollen, lovebug residue, or construction dust. The water backs up and finds the smallest seam. We clear the weeps, confirm the drainage path with a water test, and only then touch any sealant. A $120 cleaning beats a $900 frame replacement every time.
Our Mr-Glass Roof Repair Process
- 1
You call and a person answers. No voicemail tree, no call center. You tell us what you’re seeing. We ask the right questions about your Mr-Glass unit and schedule a time that works.
- 2
We diagnose on site. A background-checked, uniformed technician shows up in a marked Winslow truck. We inspect the glass, frame, flashing, and surrounding roof structure before quoting anything.
- 3
You get a written line-item quote. Upfront pricing. No vague “repair as needed” language. You’ll see the exact part, the exact labor, and the exact total before any work begins.
- 4
We make the parts decision with you. If OEM makes sense for warranty continuity or fit, we use it. If a quality aftermarket IGU or gasket outperforms the original at a better price, we tell you why and let you choose.
- 5
We do the repair and test it hard. Every Mr-Glass repair gets a hose test, a seal inspection, and a look at the surrounding roof area before we call it done. Ed Winslow personally signs off on every job before the truck leaves.
- 6
We stand behind it. The 36500-Day Done Right Promise applies here just like it does to every window and door we install. If it’s not done right, we make it right.
What Mr-Glass Roof Repair Costs in Tampa
| Repair Type | Typical Cost in Tampa |
|---|---|
| Weep hole cleaning and drainage test | $110-$180 |
| Gasket replacement (single skylight) | $280-$420 |
| Flashing repair at roof transition (shingle) | $450-$750 |
| Insulated glass unit replacement (per panel) | $390-$680 |
| Full frame reseal and reglaze (sunroom section) | $700-$1,400 |
What moves the price is access, not mystery. A two-story roof with a steep pitch in Seminole Heights costs more in labor than a single-story flat section in Carrollwood. A tile roof transition takes longer than asphalt shingle because the tiles have to come off and go back on correctly. We keep the price honest with a written quote before work begins, and we honor it. No change orders unless you ask for something different. Call (386) 559-6999 for your free estimate.
Why Tampa Homeowners Call Winslow Windows & Doors for Mr-Glass Work
Ed Winslow’s name is on the door, literally, and we’ve been serving Tampa since 2011. That matters when you’re deciding who to trust with a roof opening that protects everything under it. We know Mr-Glass units because we see them every week, not once a season. We also install and service PGT, CGI, CWS, and ES Windows, which means when a Mr-Glass panel sits next to other brands in a sunroom or roof assembly, we understand how they work together. Every technician is background-checked and in uniform before they knock. Every call is answered by a live person, day or night. And if we give you a number, that’s the number. Call (386) 559-6999 and you’ll get a straight answer and a free estimate.
FAQs
No, not with our approach. We’re an independent Mr-Glass service provider, and we document every repair with photos and part specifications. We use OEM parts where warranty continuity matters and quality aftermarket parts where they perform better. A properly documented independent repair does not void your warranty, and we give you the paperwork to prove it.
Common Mr-Glass gaskets, seals, and tempered lites are usually available within 2 to 5 business days in Tampa, and many are sourced locally. Rare Series 420 or Panorama components may take a week or two if they have to ship from the manufacturer. In the meantime, we can install a temporary weatherproof covering so your home stays dry. Call (386) 559-6999 and we’ll check current availability for your specific unit.
If the glass is intact and the frame is structurally sound, repair almost always makes more sense than replacement. A gasket or flashing fix costs a few hundred dollars, while a full replacement runs into the thousands. We’ll only recommend replacement when the frame is corroded, the glass is repeatedly failing, or the unit is beyond its service life. Call us for a free second opinion, even if another contractor said replace.
Yes, in most cases. We match the tint, thickness, and temper of the existing Mr-Glass panel so a new lite blends with the surrounding glass. Your written quote from us includes the exact glass specification, so there are no surprises on the invoice afterward.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Tampa and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.