Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Impact Windows in Tampa: What to Know First
If you own Mr-Glass impact windows in Tampa, we service them independently, honestly, and with the full weight of a company that’s been fixing windows and doors here since 2011. Typical turnaround on a Mr-Glass repair runs two to five business days once we diagnose the issue, depending on whether the part ships from a distributor here in the Tampa Bay area or has to come from further out. Our pricing is straightforward: we don’t pad service calls, we don’t sell you a whole new window when a $40 component would do the job, and every estimate is a written line-item you can take to your HOA, your insurance adjuster, or your neighbor for a second opinion. This page is for Tampa homeowners who own Mr-Glass impact windows and want a repair shop that actually knows the line, not one that’s learning on their dime. Call (386) 559-6999 and a live person answers, any hour.
Key takeaways: We’re an independent Mr-Glass service provider, not a factory affiliate. We repair, replace, and re-seal Mr-Glass impact windows across Tampa, from Hyde Park to Westchase to Brandon. Warranty-safe practices come standard. Free estimates, no trip charge inside our home county.
How Mr-Glass Products Fail - and How We Fix Them
- Fogged glass in the Mr-Glass 7300 series double-hung. This is the most common call we get from Tampa homeowners with Mr-Glass impact windows. The 7300 series carries an interlayer in the laminated glass, and when the seal along the edge deteriorates, moisture gets between the lites. In Tampa’s humidity, that fogging shows up faster than in drier climates. The glass unit has to be replaced, not just re-sealed. We source the proper impact-rated insulated unit and swap it without disturbing the frame.
- Balance shoe and coil failure on older Mr-Glass single-hungs. On impact windows that are a decade or so old, the constant salt air near the bay and the daily open-close cycle in warmer months wear down the coil springs inside the balance system. You’ll notice the sash won’t stay up or drops with a thud. We pull the sash, replace the balance hardware, and the window operates like it did on day one.
- Roller breakdown on Mr-Glass horizontal sliders. Tampa sees a lot of Mr-Glass sliders in condos and older ranch homes, and the rollers are a weak point. When a roller cracks or flattens, the panel drags, scrapes, and eventually jams. A dragging panel on an impact slider also stresses the interlock at the meeting rail. We replace the rollers, clean the track, and adjust the panel so it glides without fighting you.
- Worn weatherstripping and air leaks on Mr-Glass casements. The casement line’s gaskets compress over time, especially on west-facing elevations that bake in the Tampa afternoon sun. You’ll feel a draft or see higher cooling bills in July and August. We re-gasket the sash, realign the hardware, and the envelope closes back up tight.
- Damaged laminated glass from storm debris or frame impact. Even impact glass gets chipped, cracked, or starred. Mr-Glass impact windows are built to take a hit and stay intact, but a strong enough strike can leave the outer lite damaged. We order the correct laminated unit to match the original thickness and interlayer spec, then replace it. On an impact window, you never want a shortcut glass pack; we won’t install one.
Our Mr-Glass Impact Windows Process
- 1
You call. A live person answers at (386) 559-6999. You describe the symptom; we ask the right questions. No phone tree.
- 2
We diagnose on site. A background-checked, uniformed technician comes out, inspects the Mr-Glass window, confirms the series, and checks the frame, glass, hardware, and seal. You get a written line-item estimate before any work starts.
- 3
We make the parts decision. For warranty-covered items, we follow OEM-spec practices. For out-of-warranty windows, we weigh OEM against quality aftermarket parts and explain the trade-off in plain English so you choose with your eyes open.
- 4
We do the repair or replacement. Most Mr-Glass fixes happen in one visit once parts are in hand. We protect the work area, remove the failed component, install the new one, and clean up.
- 5
We test it. The sash cycles smooth. The lock engages. The seal reads tight. Ed Winslow signs off on every job before the truck leaves.
- 6
You’re covered. The 36500-Day Done Right Promise applies: if it’s not done right, we come back and make it right. Period.
What Mr-Glass Impact Windows Costs in Tampa
Here’s the honest math, based on Mr-Glass repair work we’ve billed across Tampa over the past several years:
- Roller replacement on a Mr-Glass slider: $125 - $220 per panel
- Balance shoe and coil replacement on a single-hung: $160 - $280 per sash
- Weatherstripping and gasket replacement on one window: $95 - $190
- Full glass replacement on a Mr-Glass impact window (standard size): $620 - $1,100 per window, depending on laminate thickness and frame size
- Full Mr-Glass impact window replacement (new window, mid-size): $900 - $1,650 installed
What moves the price: glass thickness, window dimensions, second-story access, whether the frame itself is damaged, and whether the window is still under the Mr-Glass warranty window. Every estimate is a written line item, and seniors and veterans take 10% off permanently. Call (386) 559-6999 and we’ll give you an exact number after a look.
Why Tampa Homeowners Call Winslow Windows & Doors for Mr-Glass Work
Because Ed’s name is on the door, and on every job we do. We grew up in this business the hard way: measuring, installing, and standing behind windows and doors across the Tampa Bay area since 2011. Ed learned the trade in Miami, worked everything from quiet bungalows in Seminole Heights to larger remodels closer to the Riverwalk, and he personally signs off on every job before the truck leaves. We’re a locally owned, owner-operated shop with a published address and license number, not a national chain with a ticket number. We know Mr-Glass, and when the parts or the repair call for a different direction, we also install and service PGT, CGI, CWS, and ES Windows windows daily. One call, one company, one real human on the other end. The 36500-Day Done Right Promise means if it’s not done right, we come back. No one else in Tampa offers that.
FAQs
No. As an independent Mr-Glass service provider, we follow OEM-spec parts and procedures, which keeps any remaining manufacturer warranty intact. We never install parts that would jeopardize your coverage, and we’ll tell you if a repair falls under warranty so you can file the claim yourself.
Yes. We order the correct laminated insulated units to match your window’s original glass thickness, interlayer, and impact rating. We don’t substitute non-impact glass packs to save money, because that defeats the entire reason you have impact windows in a Tampa hurricane zone. Call (386) 559-6999 and we’ll confirm the spec on your window.
Repair first, replace only when repair no longer makes financial sense. If the frame is solid, the glass is intact, and the problem is hardware or seals, repair is almost always the right call and costs a fraction of replacement. We’ll give you the straight answer on site, no upsell.
We answer live, any hour, and a service call gets scheduled fast. Call us the moment a window won’t lock or close. A window stuck open is a security and weather risk in Tampa, especially during storm season. We’ll get a technician out, diagnose it, and fix it properly, not prop it shut with a stick.
We install and service the full Mr-Glass line available in the Tampa market, including replacement windows and new-impact installations. If you’re adding Mr-Glass impact windows to a home, we quote, permit, install, and stand behind the work with the same Done Right Promise.
If you’ve got a Mr-Glass window acting up in Tampa, we’re the ones to call. Free estimate, written line-item pricing, senior and veteran discounts applied automatically, and a live person on the line at (386) 559-6999 right now. The one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Tampa and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After