Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Roof Repair in Tampa: What to Know First
CGI roof repair in Tampa typically runs $350 to $1,400 depending on whether we’re sealing a failed penetration, replacing a damaged skylight curb, or re-flashing around a vent that’s been leaking into your attic. Most CGI repair jobs on a Tampa home take one visit, often the same week you call. We give you a written line-item quote before we touch the roof, and the price on that quote is the price you pay. If you own a CGI roof in Tampa and you’ve spotted water staining, a loose fastener, or daylight where there shouldn’t be any, this page will tell you exactly what you’re dealing with – and what it costs to fix. Call (386) 559-6999 and a live person picks up, day or night.
How CGI Products Fail – and How We Fix Them
CGI roofs are built tough, but Tampa’s climate has a way of finding the weak points in any roofing system. Here’s what we actually see on CGI roofs across Tampa, from Seminole Heights to Westchase to Carrollwood.
- Panel-to-panel seam separation on CGI’s standing seam lines. After ten or twelve Tampa summers, the thermal expansion cycle works the factory sealant loose at the panel laps. Water doesn’t pour in – it wicks, and you don’t notice until the ceiling stains. We pull the lap, clean the seam to bare metal, re-seal with a commercial-grade urethane, and re-crimp. We’ve fixed dozens of these in Tampa’s older neighborhoods where homes were built in the early 2000s.
- Fastener back-out on exposed-fastener CGI panels. Tampa’s daily afternoon thunderstorms hammer roofs with sudden temperature drops. Metal contracts fast, and that repeated shock slowly unscrews the factory fasteners. You’ll see a neoprene washer start to mushroom or crack. We replace every loose or worn fastener in the affected area with a stainless steel option that holds its seal longer than the OEM spec.
- Failed penetrations around pipes and vents. This is the single most common CGI roof repair we do in Tampa. The rubber boot or silicone collar around a plumbing vent or exhaust pipe dry-rots after eight to ten years of Florida UV exposure. The metal panels around it are usually fine. We swap the boot for a new one, re-seal the base, and check the underlayment below for any rot the leak caused before it’s an expensive problem.
- Curb-mounted skylight leaks on homes with CGI’s tile profile panels. The skylight itself is rarely the problem. It’s the curb flashing – the metal transition between the CGI panel and the skylight frame. Tampa’s wind-driven rain hits that curb at an angle that finds any tiny gap. We re-flash the curb with proper step flashing and sealant, and in most cases the skylight stays right where it is.
- End-lap staining at the panel joints. You’ll see faint brown or amber drip marks below a panel overlap. That’s the sealant weeping over time, and in serious cases it means water is getting under the lap. We clean the joint, evaluate whether the overlap is still sound, and either re-seal or – if the panel has moved – reset and re-fasten the lap so water sheds the way CGI designed it to.
Our CGI Roof Repair Process
Here’s what happens when you call Winslow Windows & Doors about a CGI roof problem in Tampa.
- 1
You call, a human answers. No phone tree, no call center. We ask what you’re seeing, pull up your address if you’ve worked with us before, and get a technician scheduled.
- 2
We diagnose on the roof, not from a photo. A background-checked, uniformed tech walks the affected area, checks the panels, the flashing, and the underlayment, and photographs everything.
- 3
You get a written line-item quote. Before anything gets touched, you know what we found, what needs fixing, what it costs, and what materials we’ll use. No vagueness.
- 4
We make the parts call with you. If it’s a warranty-critical repair, we recommend OEM CGI materials. If it’s a discontinued series or a non-warranty issue, we’ll show you an aftermarket option that performs as well and costs less. You decide – we just give you honest numbers.
- 5
We do the repair and test it. Seams sealed, fasteners replaced, flashing re-set. Then we run water over the repaired area from a controlled source to confirm it’s dry before we climb down.
- 6
We walk it with you and stand behind it. You see the finished work, we answer any questions, and the whole job rides on the 36500-Day Done Right Promise. If it’s not done right, Ed Winslow comes back and makes it right. Period.
What CGI Roof Repair Costs in Tampa
Here are the numbers we quote most often for CGI roof repairs in Tampa. These are real ranges, not teaser prices.
- Pipe boot or vent collar replacement: $350 to $550
- Seam re-seal (single lap or panel joint): $400 to $750
- Skylight curb flashing repair: $600 to $1,100
- Fastener replacement across a roof section: $500 to $900
- Panel replacement due to storm damage or corrosion: $800 to $1,400+ depending on panel profile and accessibility
What moves the price: roof pitch and height, whether the damaged panel is a discontinued CGI series (which can affect material cost), and whether the underlying underlayment needs repair. You’ll never see a change order from us once the quote is signed. Call (386) 559-6999 for a free estimate – and remember, there’s no trip charge if you’re inside our home county.
Why Tampa Homeowners Call Winslow Windows & Doors for CGI Work
We’ve been in business since 2011, and Ed Winslow’s name has been on the door the whole time. That’s not a marketing line. It’s how we operate. When you call about a CGI roof repair in Tampa, you get a technician who’s been trained on metal roofing systems and who shows up in uniform with his name and face on file. We’re an independent CGI service provider – not affiliated with or authorized by the manufacturer – which means we answer to you, not to a corporate warranty department. And if your CGI issue turns out to be part of a bigger roofing problem, we’re also authorized installers for PGT, CWS, ES Windows, and ECO Window Systems, so we can handle the surrounding work without bringing in another company. Every repair carries the 36500-Day Done Right Promise, and every call is answered by a live person. A neighbor you can call at 2 a.m., and someone will actually answer.
FAQs
A properly done repair won’t void your CGI warranty, but using non-OEM parts on a panel under warranty can complicate a future claim. We flag any warranty concern before we start, and we default to OEM CGI materials on warranty-covered panels unless you tell us otherwise. Call (386) 559-6999 and we’ll explain exactly what applies to your roof.
Most non-emergency CGI roof repairs in Tampa are scheduled within the same week, and for leaks that are actively letting water into the house we’ll get a tarp up and a tech out quickly. When you call, a live person answers and gets you on the schedule right then – no waiting for a call back.
Sometimes, yes. CGI has shifted their product lineup over the years, and certain older Tampa homes have panels that aren’t manufactured anymore. We’ll source a match when we can, and when we can’t, we’ll tell you straight and show you the closest available profile with a color chart in hand before you approve anything.
If the damage is isolated – a single penetration leak, one hail-dented panel, a failed seam – repair is almost always the smarter money. We’ll tell you plainly if your roof has reached the point where repairs are a bandage on a bigger problem. You’ll get an honest recommendation, not a sales pitch. Call (386) 559-6999 for a free estimate and we’ll give you the straight answer.
No trip charge if you’re inside our home county. If you’re farther out, we’ll tell you before we roll, and our written estimate is yours to keep whether you hire us or not. We also offer a free second opinion on any written roof repair estimate, so if another company gave you a number, bring it to us and we’ll go over it line by line.
Upfront pricing. No surprises on the invoice. Ed’s name is on the door – literally. The one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Tampa and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.