Arched & Curved Windows in Tampa, FL

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Arched & Curved Windows in Tampa, FL

Arched and curved windows are our Custom & Geometric Windows services built to custom dimensions – no two are exactly alike, and getting them right requires precise measurement, the right glazing, and an installer who’s done this before. At Winslow Windows & Doors, we fabricate and install arched, radius-top, elliptical, and full-circle windows for Tampa homeowners who want something that performs as well as it looks. Call us at (386) 559-6999 – a real person picks up, any hour of the day or night.

We’ve been fitting Custom Impact Windows and specialty windows in Tampa since 2011, and arched units are some of the most satisfying work we do. They’re also the most punished by Florida’s climate – wide expanses of glass, thin frame tolerances, and the intense UV and storm exposure this region delivers year-round. Getting a replacement wrong costs a lot more than getting it right the first time, and that’s where the 36500-Day Done Right Promise matters. If something’s off, Ed Winslow’s name is on the job and we make it right – no runaround.

This page sits under our broader Custom & Geometric Windows in Tampa service, which covers the full range of non-standard window shapes we handle. If you’ve got an arched or curved opening that needs new glass, a broken seal, or a full replacement, you’re in the right place.

When You Need Arched & Curved Windows

Geometric & Shaped Windows show up in a lot of Tampa-area homes – Mediterranean Revival houses in Hyde Park, newer construction in New Tampa’s planned communities, and custom builds in Avila and Carrollwood. If any of the following applies to your home, it’s worth a call.

• The existing arch is fogged, cracked, or seal-failed. Tampa’s humidity accelerates seal failure in double-pane units – once moisture gets between the panes, you’re looking at permanent fogging that no cleaning will fix. Arched units are harder to source off-the-shelf, so most homeowners live with it longer than they should.
• Your home has a fixed arch over an operable window below, and the arch is single-pane. Single-pane arched transoms are common in older Seminole Heights and South Tampa homes. They’re thermal weak points and, in a named storm, a liability. Upgrading to an impact-rated unit changes both equations.
• You’re building new or adding an addition and want an arched opening. Architects and custom builders in Tampa’s Westchase and Cheval corridors spec these regularly. We work from blueprints or rough opening measurements and can coordinate directly with your GC.
• Your current arch leaks around the frame. Water infiltration on arched windows often appears at the curved header or at the joint where the arch meets a rectangular unit below. In Tampa’s wet season, a slow leak at that junction can do serious damage fast.
• You need impact-rated glass in an arched shape. Florida Building Code requires impact-rated or protected glazing in wind-borne debris regions, and the Tampa Bay coast falls squarely in that zone. Not all glass suppliers fabricate laminated safety glass in curved profiles – we source from brands that do.
• The frame is deteriorating – wood rot, warped vinyl, or corroded aluminum. Salt air from Tampa Bay reaches further inland than most homeowners expect. If the frame around your arched window is pulling away from the wall or showing rot at the sill, the glass itself may still be fine – but the whole unit needs to come out and be reset properly.

Our Arched & Curved Windows Process

Custom windows require more precision up front than a standard replacement. Here’s how we handle an arched or curved window job from the first call to the final walkthrough.

1. Measure the rough opening and document the curve geometry. Arched windows aren’t just “wide and tall” – the rise, the radius, and the spring-point location all affect how the unit is fabricated. We come to your Tampa home, take multiple measurements of the existing opening or the planned opening, and photograph the frame condition. This is not something we estimate from a photo or a homeowner’s sketch.
2. Review glazing and frame options with you on-site. Depending on your home’s wind zone, aesthetic goals, and budget, we’ll walk through impact laminate versus non-impact glass with shutters, frame material choices (vinyl, aluminum, fiberglass), and finish options. For coastal Tampa neighborhoods, we lean toward aluminum or fiberglass frames that won’t absorb salt moisture the way wood does. Brands like ES Windows and ECO Window Systems both offer impact-rated arched and radius-top units with solid Miami-Dade NOA ratings.
3. Provide upfront written pricing before you commit to anything. No trip charge, no vague “starting at” numbers. You’ll see exactly what the unit costs, what installation labor covers, and what – if anything – we anticipate in the way of framing repairs. Seniors and veterans get 10% off automatically, and if you had another contractor give you a written estimate, we’ll review it at no cost.
4. Order and track the custom fabrication. Most arched units run four to eight weeks from order to delivery, depending on the manufacturer and the complexity of the curve. We’ll keep you updated – not with an automated email, but with a real call or text from our office. If there’s a delay, you hear about it from us first.
5. Remove the old unit and inspect the rough opening before anything goes in. This is where surprises happen, and we plan for them. Old Tampa homes often hide water damage behind the existing frame. We assess, repair what needs repairing, and don’t just set a new window on top of a compromised opening.
6. Install, flash, seal, and do a final walkthrough with you. Proper flashing on a curved header is not the same as flashing a square window – the geometry creates points where water can track if the installation isn’t done carefully. We seal against Florida’s wind-driven rain standard and walk you through the finished installation before we pack up. The 36500-Day Done Right Promise covers the work from this point forward.

Arched & Curved Windows Pricing in Tampa

Arched and curved windows cost more than standard rectangular units – that’s the honest answer. The fabrication is custom, the labor is more involved, and the glass options for curved profiles are fewer. That said, prices vary considerably based on size, shape complexity, and glazing type.

A few factors push costs toward the higher end in Tampa’s market specifically:

• Impact-rated laminated glass in non-rectangular profiles requires specialized fabrication – fewer manufacturers do it, and lead times are longer.
• Homes in Tampa’s coastal High-Velocity Hurricane Zone corridors (including parts of South Tampa, Davis Islands, and Bayshore) must meet stricter glazing requirements under the Florida Building Code.
• If the existing frame has rot or moisture damage – common in homes near Old Tampa Bay – that repair adds time and material cost before a new unit can go in.
• Accessibility matters. A ground-floor arched window in a Lutz or Land O’ Lakes new construction is simpler to access than a second-story arch on a Hyde Park historic home with mature landscaping and tight setbacks.

We don’t pad estimates, and we don’t quote low to win the job and add to the invoice later. Call (386) 559-6999 and we’ll come out, measure the opening, and give you a written number you can hold us to. If you already have a written quote from another company, we’ll review it for free.

What Sets Winslow Apart for This Work

Tampa has no shortage of window companies. Most of them do great work on standard rectangular units. Arched and curved windows are a different category – the templates don’t transfer, the measurements take longer, and a small error in the radius means a unit that either won’t fit or will leak.

Ed Winslow has been doing this since 2011. His license number is on every permit we pull – and yes, we pull permits. That’s not optional for window replacement in Hillsborough County, and any company telling you otherwise is worth a second look. We work with fabricators like Mr-Glass who specialize in custom profiles, and we carry the product knowledge to match the right unit to your opening, your wind exposure, and your budget.

Background-checked technicians show up in uniform. You know who’s coming before they arrive. And if you call at 11 p.m. because a window frame failed and you’ve got a tropical system sitting off the Gulf, someone answers. That’s not a selling point – it’s just how we operate.

The 36500-Day Done Right Promise applies to every arched window we install. That’s 100 years as a standard of accountability. We’re not going anywhere, and neither is our commitment to the work.

Neighborhoods We Serve Regularly for Arched Windows

We cover the full Tampa metro. For arched and curved window work specifically, we see the highest volume in:

• Hyde Park and Palma Ceia – older Mediterranean Revival homes with original arched transoms that need impact-rated replacements
• Davis Islands and Bayshore Beautiful – salt exposure is real here and pushes homeowners toward aluminum-framed impact units
• New Tampa and Wesley Chapel – newer construction with architectural arches that were originally installed as decorative non-impact units and now need upgrading
• Carrollwood, Westchase, and Cheval – custom and semi-custom builds where arched windows are specified as design features
• Seminole Heights and Riverside Heights – Tampa’s craftsman and bungalow stock often has modified arch shapes that require careful templating

Key Takeaways

• Arched and curved windows are custom-fabricated – no two openings are the same, and accurate field measurement is the most important step.
• Impact-rated arched units are required in many Tampa and Hillsborough County wind zones under Florida Building Code.
• Tampa’s salt air, high humidity, and hurricane season make frame material and glazing choices more consequential than in other markets.
• Prices range from roughly $450 for a small non-impact transom to $5,500+ for a large impact-rated elliptical – always based on a written, itemized estimate.
• Winslow Windows & Doors has been installing specialty windows in Tampa since 2011, pulls proper permits, and backs every job with the 36500-Day Done Right Promise.
• Seniors and veterans receive 10% off, and there’s never a trip charge for jobs in our home county.

FAQs – Arched & Curved Windows

Can you replace an arched window with an impact-rated unit in Tampa?

Yes, impact-rated arched and radius-top windows are available and are what we install for most Tampa homes in wind-borne debris regions. Manufacturers like ES Windows and ECO Window Systems fabricate laminated safety glass in curved profiles with Miami-Dade Notice of Acceptance ratings. The lead time is longer than a standard unit – typically four to eight weeks – but the installation process is the same. Call (386) 559-6999 and we’ll confirm which wind zone your address falls into and quote accordingly.

How much does an arched window replacement cost in Tampa?

For a typical mid-size impact-rated arched window in Tampa, budget $1,400 to $2,800 per unit including installation. Small radius-top transoms run lower – $750 to $1,400 impact-rated – while large elliptical or full-circle statement windows can reach $5,500 or more depending on size and glass specification. Framing repairs, if needed, add to that. Every job gets a written, itemized estimate before any work begins. Call us for an exact number – estimates are free.

Do you need a permit to replace an arched window in Hillsborough County?

In most cases, yes. Window replacements in Hillsborough County that change the size, framing, or glazing type generally require a permit under Florida Building Code. We handle the permit application as part of the job – it’s not an add-on and it’s not optional. Permits protect you as a homeowner: unpermitted window work can complicate home sales and insurance claims down the road. Any contractor telling you permits aren’t needed for this work deserves a harder question or two.

My arched window is original to a 1920s Tampa home. Can you match the shape?

We template from the existing opening directly, so we work from the actual geometry of your window rather than a standard catalog radius. Older Tampa homes – particularly in Hyde Park, Seminole Heights, and Ybor City’s surrounding blocks – sometimes have non-standard rise-to-span ratios that don’t match any off-the-shelf arch, requiring Oversized Openings expertise. We’ve handled enough of these to know what to look for. Bring us out, let us measure, and we’ll tell you honestly whether it’s a straightforward order or a more complex custom fabrication. Call (386) 559-6999 to schedule.

For the full range of non-rectangular window shapes we install, visit our Custom & Geometric Windows in Tampa page. And if you’d like to learn more about who we are and what we stand behind, our home page covers the basics.

Ready to move forward? Call (386) 559-6999 – someone answers every call, around the clock. Ed Winslow’s name is on this business and on every job we do. We’ll come out, measure your opening, and give you a written estimate with no surprises on the invoice.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Tampa since 2011.