Awning Windows

Awning Windows in Tampa, FL | Winslow Windows & Doors

Awning windows are top-hinged, crank-out units that let Tampa homeowners keep the air moving even when the afternoon rain rolls in. Because the sash opens from the bottom and angles outward, water sheds away from the opening instead of into it. That’s a real advantage in a city that gets sudden downpours every summer. We’re Winslow Windows & Doors, and we install awning windows in impact-rated aluminum and vinyl across Tampa, St. Pete, Brandon, and the surrounding bay area. If you’re replacing windows in a bathroom, kitchen, or anywhere you want ventilation plus storm protection, call us at (386) 559-6999 for a free on-site measurement.

Call (386) 559-6999

Product Overview - Awning Windows

Awning windows haven’t always been the first thing Tampa homeowners ask for, but once they understand the profile, they usually want them somewhere in the house. The design is simple: hinges at the top, a crank mechanism at the bottom, and a sash that opens outward from the base. When the window is cracked open a few inches, rain hits the angled glass and runs off, which means you can leave it open during a passing storm without soaking your windowsill or floor.

In hurricane-prone construction, the details matter. Our awning windows are built around laminated impact glass with a PVB interlayer, set into weathertight aluminum or vinyl frames. The hardware is engineered to stay rigid under pressure, and the frame-to-sash seal is designed for wind-driven rain, not just a light drizzle. Architecturally, these windows work well in tight vertical spaces: over kitchen sinks, in shower areas with privacy glass, above doors, or in a row along a hallway where you want cross-ventilation without floor-level windows. They’re also a clean fit for mid-century and Florida modern homes in neighborhoods like Seminole Heights, Palma Ceia, and Davis Islands, where horizontal lines and simple openings are part of the look.

We’ve installed this product line across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass configurations. Each one is ordered for the specific opening size and wind zone of your home, so you’re not getting a warehouse generic window. You’re getting a system matched to your structure.

Technical Specifications

Here’s what the awning window line looks like in terms of materials, glass, and finish choices. We keep this simple because the real spec work happens when we measure your openings and pull the right product approval for your address.

• Frame materials: Aluminum or vinyl, both engineered for Florida’s humidity, salt exposure, and UV load
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass
• Finish options: White, almond, bronze, black, tan
• Screen options: Fixed screen or retractable screen
• Design pressure: Matched to your wind zone, up to +/-100 PSF, never higher
• Compliance: Miami-Dade NOA and Florida Product Approval numbers issued per configuration; engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements
• Installation standard: AAMA 2400/2410 practice with AAMA 812 low-expansion foam perimeter sealant

The size range depends on the frame material and the specific configuration of the opening. We’ll walk you through what fits and what doesn’t once we measure.

Hurricane & Compliance Performance

Here’s the part where an awning window either earns its place in a Tampa home or doesn’t. Every feature below maps to a specific compliance standard or a specific failure point we see in the field. We’re not going to bury you in acronyms, but we do want you to understand what you’re actually buying.

Laminated Impact Glass

The glass is the heart of the system. Laminated impact glass bonds two panes together with a PVB interlayer, so if something hits the window hard, the glass cracks but holds in the frame instead of shattering into your living room. That’s the difference between a repair after a storm and a cleanup after a storm.

Miami-Dade NOA / Florida Product Approval

Each configuration in our product line carries a Miami-Dade NOA and Florida Product Approval number. These are issued per configuration, not blanket ratings, so the exact number for your window depends on your size, glass, and frame combination. We pull the right document for your specific quote and your permit package.

FBC/HVHZ Compliance

These awning windows are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. That’s the strictest wind and impact standard in the country, written for places like Tampa, where a storm’s worst day is the day the codes are tested against reality.

TAS 201 / 202 / 203 Testing Context

HVHZ-rated products are tested under a protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. These tests aren’t a marketing badge. They’re the reason a window that looks like a window can take a hit and keep doing its job.

Design Pressure for Your Wind Zone

Design pressure is a PSF rating, not a wind speed. Our awning windows are matched to your home’s wind zone, up to +/-100 PSF, and never higher. We don’t over-spec, because driving up a design pressure beyond what your zone requires just adds cost without adding safety.

Energy Performance

Low-E and insulated glass options are available for homes that want better solar control and thermal performance. In Tampa, the sun does as much daily work as any storm, so pairing impact-rated glass with a Low-E coating is a reasonable upgrade for west-facing rooms or any opening that gets direct afternoon heat.

Color & Glass Options

Awning windows read differently depending on the finish and glass you choose. We stock the five finish options that cover most of the Tampa market: white, almond, bronze, black, and tan. White and almond go well with coastal cottages and Florida ranch homes, especially in South Tampa and Westchase. Bronze and black read more modern, and we see them frequently on newer builds and renovations in Channelside, Hyde Park, and along Bayshore Boulevard where homeowners are going darker on window trim. Tan falls in between, and it fits the neutral Mediterranean and Spanish-style exteriors common in Carrollwood and Town ‘n’ Country.

On glass, the choices break down by what you’re solving for. Clear laminated impact glass is the straightforward option: maximum light, impact protection, nothing more. Tinted glass cuts glare and heat without a coating. Low-E insulated glass is the efficiency pick, cutting solar gain while meeting the same HVHZ impact requirements. Any of these can be paired with a fixed or retractable screen, depending on whether you want the screen always in place or tucked away when the window is closed.

We don’t push a single “best” option. We’ll ask where the window faces, what room it serves, and whether the goal is more breeze, less heat, or both. That usually narrows the decision fast.

Installation by Winslow Windows & Doors in Tampa

The window is only half the equation. A hurricane-rated awning window that’s installed out of square, poorly shimmed, or sealed with the wrong product won’t perform the way its NOA document says it should. In the worst cases, the window fails at the rough opening, not at the glass. We control that by handling the installation ourselves, not subbing it out to a crew that installs eight different brands a week.

Every install starts with a pre-install inspection. We’re checking the rough opening, looking for water intrusion or framing rot, and confirming the window we’re about to set matches the quote and the product approval we filed. The window goes in level, plumb, and square, set to the manufacturer’s specs and to HVHZ-compliant installation practice. We use AAMA 812 low-expansion foam around the perimeter, which seals without bowing the frame the way a can of great-stuff from the hardware store will. That’s followed by the flashing and sealing details appropriate for your wall assembly and exposure, then a final water test on the opening and a full cleanup. We also handle the permitting conversation: if your jurisdiction requires an HVHZ product approval or an NOA submittal for the permit, we pull the right documents for your exact configuration and make sure they’re in the package before you file.

In Tampa specifically, the wind zone and exposure category matter. A house on the open water in Apollo Beach or Beach Park is in a different exposure than a block home inland in Lutz or New Tampa. We factor that into the spec each time, because the design pressure that’s right for one isn’t necessarily right for the other. It’s one part of the job we never guess on.

Frequently Asked Questions - Awning Windows

Get a Quote - Awning Windows in Tampa

If you’re thinking about awning windows for a room that needs ventilation and storm protection, the fastest way to a real number is a measurement at your home. We’ll come out, check the openings, confirm your wind zone, and pull the right product approvals for your configuration. Call (386) 559-6999 to schedule a free on-site measurement and get a written quote for your awning window project in Tampa.

Written by the team at Winslow Windows & Doors, serving Tampa, FL with hurricane-impact window and door installation.