Mr-Glass Window Replacement Nationwide | Winslow Windows & Doors

Mr-Glass Window Replacement: The Tampa Owner’s Guide

If you have a Mr-Glass window in Tampa with a cracked pane, failed seal, or hardware that’s given out, we stock the replacement parts and install them, typically for $220 to $610 per window depending on size and glass package. Most Mr-Glass replacements are done in one visit once we’ve confirmed your model. The way homeowners usually find us is after a storm rolls through and they notice fog between the panes, or a window that won’t lock anymore, or a crack that’s been spreading since a lawn mower kicked up a rock. You call, we identify the part, we quote you a fixed price, and Ed’s crew handles the rest.

Call (386) 559-6999

Which Mr-Glass Models This Applies To

Mr-Glass builds a range of impact-rated and non-impact aluminum and vinyl windows sold throughout Florida, and the replacement part depends on which line you have. Common Mr-Glass series we see in Tampa include their single-hung, horizontal roller, and fixed picture windows, plus casement models in a few older builds in Seminole Heights and along Bayshore. The fastest way to match the part is to find the small silver or white sticker on the frame or sash. It’ll show a series code, glass type, and sometimes the date of manufacture. A photo of that sticker sent to us saves half a day.

For the glass itself, Mr-Glass impact windows use a laminated glass makeup that’s thicker and heavier than standard annealed glass. If your home is in a wind-borne debris zone, which includes most of Tampa and Hillsborough County, the replacement glass has to match that impact rating to keep your home up to code. We install OEM Mr-Glass glass when the series calls for it, and we also carry a quality aftermarket equivalent for older Mr-Glass lines where the original glass is no longer produced. The aftermarket glass meets the same impact and energy standards; the difference is the label. One thing to know: Mr-Glass frames from the mid-2000s used a narrower glazing channel than current models, so the replacement glass has to be cut to the older thickness or it won’t seat properly in the gasket. We measure every job ourselves before ordering, so this doesn’t become your problem.

We’re an independent Tampa window and door company, not a Mr-Glass dealer or affiliate. That means we match existing Mr-Glass work without pushing you toward a brand you didn’t ask for. We also stock parts for PGT, CGI, and CWS windows, which helps when a Tampa home has a mix of brands.

Signs Your Mr-Glass Window Replacement Is Failing

• Fog or condensation between the panes. The seal between the two glass layers has failed and moisture is getting in. In Tampa’s humidity, this shows up as a permanent haze that never wipes off, since it’s inside the glass unit.
• A crack that grows in a straight line. This is a stress crack from frame movement or poor installation, not an impact. Once it starts, temperature swings and building settling in Florida’s sandy soil will keep working it longer.
• The window won’t lock or the latch grinds. The locking hardware or balance shoe in a Mr-Glass single-hung can strip after years of salt air and use. A window that won’t lock is both a security problem and a sign the sash isn’t seating square.
• You hear more road noise or feel drafts. Seals degrade on the perimeter of Mr-Glass frames after a decade or more in the Florida sun, and the window loses its thermal and acoustic seal. If you’re hearing Dale Mabry traffic through a closed window, the seal has gone.
• Water staining around the frame after rain. The weep system or the glazing seal has failed, and water is tracking into the wall cavity. In Tampa’s rainy season, this turns into mold and rot fast if it’s not addressed.

Replacement Cost & What’s Included

For a Mr-Glass window replacement in Tampa, you’re looking at roughly $220 to $410 for standard clear or low-E glass in most sizes, and $380 to $610 for impact-rated laminated glass. The range comes down to three things: the glass size in square inches, whether you need impact or non-impact, and whether the frame itself needs any repair before the new glass goes in. A full Mr-Glass window replacement including the frame runs higher, typically $700 to $1,900 installed depending on the series and size.

Our quotes are line-item: glass cost, labor, disposal of the old sash or pane, and any frame work spelled out separately. The price we quote is the price on the invoice, no change orders because we didn’t plan properly. Every Mr-Glass replacement we install is covered by our workmanship warranty, and the glass itself carries the manufacturer’s seal-failure warranty. If the seal fails again within the warranty window, we come back and replace the glass unit. No arguing about who pays.

DIY or Call Us?

Mr-Glass windows are not a good DIY candidate. The glass units in impact-rated models are heavy, sometimes over 60 pounds for a mid-size window, and setting them wrong means a seal failure in months or a shattered pane in the driveway. There’s also the code angle: Tampa requires impact-rated glass in wind-borne debris zones, and a homeowner who installs the wrong glass is gambling with their insurance coverage after the next hurricane. Non-impact Mr-Glass windows are lighter, but the glazing gaskets and balance systems are finicky enough that a mistake costs more to fix than the original repair.

What you can safely do is find the model sticker, take clear photos of the window from inside and out, and call us at (386) 559-6999. That’s enough for us to identify the part and quote the job before we even drive out. If it’s an emergency, like a broken pane that’s letting rain in, we’ll advise you on temporary covering until our crew arrives. For everyone in our home county in the Tampa area, there’s no trip charge.

FAQs