Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterES Windows Roof Repair in Tampa: What to Know First
ES Windows roof repair in Tampa typically runs $350 to $1,400 depending on whether we’re sealing a leaking skylight curb, replacing rotted flashing around a dormer window, or rebuilding the waterproofing under a roof-integrated glass feature. Most jobs are completed in a single day once we diagnose the failure point. As an independent ES Windows service provider, we work on the window-to-roof connection the way ES Windows’s own install specs intend, and we give you a written line-item price before any work begins.
If you own an ES Windows product in Tampa and you’ve spotted water staining near a skylight, damp drywall under a dormer, or peeling paint where your roof meets window framing, this page will tell you what’s actually happening and what it costs to fix. Call (386) 559-6999 and a live person answers, day or night. Ed Winslow’s name is on the business, and he means every word.
How ES Windows Products Fail - and How We Fix Them
ES Windows builds their frames and sashes well, but the roof connection is where we see most of the failures in Tampa. Here’s what we find on the jobsite, in plain language.
- Skylight curb flashing breakdown on the ES-Sky series. The glass unit itself rarely fails. What fails is the aluminum curb flashing that bridges the skylight to the roof deck. After ten-plus years of Tampa’s afternoon thunderstorms and UV exposure, the factory flashing seam sealant dries out and separates, letting water wick under the shingles. We remove the old flashing, inspect the curb for rot, and re-flash with a sealed, stepped system that moves water off the curb instead of into it.
- Dormer window side-wall flashing gaps on ES-Wall fixed units. ES Windows fixed units installed in dormer cheeks rely on counter-flashing that often gets skipped or done wrong by the original roofer. We commonly find water traveling behind the window flange where the roof slope meets the vertical wall. The fix is pulling the surrounding shingles, installing proper step flashing and counter-flashing, and resealing the flange with a polyurethane sealant rated for coastal humidity.
- Roof-integrated glass panel sealant failure on the ES-View custom line. Custom roof glass panels from ES Windows look sharp on a lanai or covered patio, but the perimeter sealant joint where the insulated glass unit meets the roof curb has a hard life in Tampa’s heat. We see sealant go chalky and crack within six to eight years. We cut out the old bead, prep the joint, and re-seal with an elastomeric product that stays flexible through our thermal swings, then test the joint with water before we call it done.
- Weep system clogs on operable skylight vents. ES Windows makes operable roof vents with a small weep channel to drain condensation. In Tampa, pollen and live oak debris plug those weeps fast. Standing water then works backward under the frame. We clear the weeps, flush the channels, and install a slightly wider drain path so spring pollen season doesn’t knock the system out again.
- Hurricane-strap corrosion at the roof curb. This one surprises people. ES Windows units installed with galvanized steel straps can develop rust where the strap meets the aluminum frame, especially within a few miles of Tampa Bay. Salt air speeds it up. We replace the corroded straps, re-secure the unit to the curb, and check the torque on every anchor bolt. It’s a small fix that prevents a big leak later.
Our ES Windows Roof Repair Process
Our process is straightforward because we’ve done this work enough times to know where the shortcuts live, and we don’t take them.
- 1
The call. You reach a live person at (386) 559-6999. We ask about your ES Windows product, where the leak shows up, and when you first noticed it.
- 2
The site check. A background-checked, uniformed technician comes out, inspects the window-to-roof connection, and traces the water path. We don’t guess. We find the actual entry point before we quote.
- 3
The parts decision. We’ll use OEM ES Windows parts when the job calls for them and when they’re available without a six-week wait. Where a quality aftermarket flashing or sealant from a supplier like GAF or Sika does the job as well or better for less money, we’ll tell you why, in plain English, with the price difference.
- 4
The repair. We remove the failed components, prepare the opening, install the new flashing or sealant system, and detail the junction so water has nowhere to go but off your roof.
- 5
The water test. We run water over the repaired area before we pack up, not after. If water gets through, we’re not done.
- 6
The sign-off. Ed Winslow personally reviews every ES Windows roof repair before the truck leaves. His name is on the door, literally, and his name goes on the work order too.
What ES Windows Roof Repair Costs in Tampa
Here’s what we charge for the ES Windows roof work we do most often in Tampa. These are real ranges, not teaser prices.
| Repair Type | Typical Cost Range |
|---|---|
| Skylight flashing reseal (single unit, pitched roof) | $350 - $650 |
| Dormer window side-wall flashing rebuild | $550 - $950 |
| Roof glass panel perimeter reseal | $400 - $800 |
| Skylight vent weep system clear and re-detail | $200 - $400 |
| Hurricane-strap replacement and re-anchor | $300 - $600 |
| Full curb rebuild (rot repair included) | $900 - $1,400 |
What moves the price: roof pitch, how much decking has rotted, whether we need to match tile or metal roofing material around the repair, and OEM part lead times. You’ll see every line item before we start. No change orders unless you approve them in writing first. Call (386) 559-6999 and we’ll give you an exact quote, free.
Why Tampa Homeowners Call Winslow Windows & Doors for ES Windows Work
We’ve been doing exterior work since 2011, and we’re local, owned and operated by Ed Winslow, with a published address and license number you can check. Every technician who shows up is background-checked and in uniform, so you know who’s at your door before you open it. And the 36500-Day Done Right Promise is simple: if it’s not done right, we make it right. A hundred years’ worth of accountability is not something a national chain will ever offer you.
We also know the neighboring brands. If your ES Windows repair shows us that the real problem is a PGT, CGI, CWS, or ECO Window Systems unit tied into the same roof line, we can address it. One crew, one diagnosis, one fix. Tampa homeowners don’t need to juggle three contractors to keep the rain out.
And we answer the phone. 24/7. A live person. Not a voicemail loop. Try it: (386) 559-6999.
FAQs
No. As an independent ES Windows service provider, we follow ES Windows’s published installation specs for flashing and sealing, which keeps your original window warranty intact. The roof-to-frame connection work we do is separate from the window unit itself, and most ES Windows warranty claims we see come from improper roofing work, not from repairs that follow the spec.
Sometimes, but not always. OEM ES Windows components, especially for the custom ES-View line, can take four to eight weeks to arrive. For common failure points like flashing, sealant, and straps, we use commercial roofing products from GAF and Sika that meet or exceed ES Windows’s published performance specs and are available immediately. We’ll show you your options and let you decide.
Most ES Windows roof units in Tampa are worth repairing if the glass is intact, the frame is structurally sound, and the leak is at the flashing, sealant, or weep level. Replacement makes sense when the insulated glass has failed and you can see fogging between the panes, or when rot has spread into the curb and surrounding decking to the point where a patch job won’t hold. We’ll tell you honestly which side of that line you’re on.
We schedule most ES Windows repairs within a few days of your call, and a live person answers 24/7 to get you on the books, even if you call at 2 a.m. with water coming in. Roof repair is not a job where we promise same-day service, because doing it right takes daylight and a dry roof. But we’ll get you scheduled, quoted, and fixed as fast as Tampa weather allows.
When the scope of work requires a permit, yes. Our team pulls the permit, schedules the inspection, and makes sure the job passes before we consider it done. Most flashing and reseal jobs don’t trigger a permit in Tampa, but if your repair involves structural curb rebuilding, we handle the paperwork so you don’t have to.
If you’re still not sure what’s leaking or what it’ll cost, call (386) 559-6999 for a free second opinion on any written estimate you’ve already received. We’ll give you the straight answer.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Tampa and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.