Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Roof Replacement & Installation in Tampa: What to Know First
CGI roof replacement and installation in Tampa typically runs $8,500 to $22,000 depending on roof size, slope, and whether you’re going with shingle, tile, or metal. We’re an independent CGI service provider, which means we work on CGI systems without being tied to the manufacturer’s corporate installer network. Most CGI roof jobs in Tampa wrap up in 3 to 7 working days once materials land and permits clear.
This page is for homeowners across Tampa who already own CGI products or are weighing CGI for a new roof, especially in neighborhoods like South Tampa, Westchase, Carrollwood, and Seminole Heights. If you’ve got questions about a specific CGI roof system, call (386) 559-6999 and a live person picks up. No phone trees, no callbacks three days later.
Key Takeaways:
- We’re an independent CGI roof replacement installer in Tampa, not a corporate franchise
- Free written line-item estimates before any work starts
- Ed Winslow signs off on every CGI roof job personally
- Live person answers the phone 24/7, including weekends
- 36500-Day Done Right Promise: if it’s not right, we come back and make it right
How CGI Products Fail - and How We Fix Them
CGI makes impact-rated roof components and underlayment systems built for Florida’s wind codes. But in Tampa’s heat, humidity, and storm cycles, we see certain failure patterns over and over. Here’s what we find and what we do about it:
- CGI Sentinel Shingle line – lifted tab edges after wind-driven rain. This usually isn’t the shingle failing. It’s the underlayment bond breaking down beneath it, often because a prior installer nailed through the nailing strip at the wrong angle. We strip the affected section, inspect the deck, and relay with proper nailing patterns that match CGI’s install spec.
- CGI StormClad metal panel oil canning on west-facing slopes. Tampa afternoon sun heats metal panels unevenly, especially on roofs over 40 feet long. Oil canning isn’t a structural problem, but it drives owners crazy. We correct it by adjusting fastener tension and adding expansion joints where CGI allows for them, not by slapping caulk over the seams.
- CGI TileGuard concrete tile spalling at the eaves. Salt air from Tampa Bay plus the constant wet-dry cycle near gutter lines breaks down the tile surface over 10 to 15 years. Replacing one tile at a time doesn’t fix the underlying moisture path. We pull the eave course, install a breathable membrane strip, and reset tiles with correct overhang so water sheds instead of wicking back.
- CGI ImpactShield underlayment delamination under ridge vents. We see this in homes throughout Tampa where attic heat hits 140°F in August. The adhesive on older underlayment releases from the deck, creating channels for water. The fix isn’t just new underlayment, it’s also correcting vent airflow so the next layer doesn’t cook for a decade.
- CGI FlexEdge hip and ridge cap cracking on steeper roofs. Tampa homes in Bayshore and Hyde Park often have 8/12 to 10/12 pitches, and ridge caps take more thermal movement than flatter runs. We replace cracked caps with the right profile match and seal the fasteners with the manufacturer-specified sealant. Skipping the sealant means a leak inside two storm seasons.
Our CGI Roof Replacement & Installation Process
Every CGI roof job in Tampa follows the same sequence, and Ed Winslow checks the work before we call it done.
- 1
Call and scheduling. You reach a live person at (386) 559-6999. We ask about roof age, roof type, and what you’re seeing, then book a site visit that works for your schedule.
- 2
On-site inspection. We walk the roof, document the failing areas, and check the attic for secondary signs like water staining or trapped heat. Photos go into your estimate so you see exactly what we saw.
- 3
Written estimate. Line-item pricing, not a lump sum. We show you material costs, labor, permit fees, and disposal separately. The price we quote is the price on the invoice. No change orders mid-job because we “found something unexpected.”
- 4
Parts decision. For CGI components, we use OEM parts where the warranty still applies. Where OEM is discontinued or ships with a 6-week lead time, we’ll tell you the aftermarket equivalent, the cost difference, and our experience with it. You decide, we install.
- 5
Removal and installation. We tear off, inspect the deck, repair any rot, install the new system to CGI’s documented specs, and keep the job site clean. Tarps go down before work starts and stay until the final sweep.
- 6
Final walkthrough and guarantee. Ed personally walks the finished roof with you. If anything doesn’t look right, it gets fixed before we leave. Then it’s covered by the 36500-Day Done Right Promise, which is what it sounds like: done right for 100 years, or we come back.
What CGI Roof Replacement & Installation Costs in Tampa
Here’s what Tampa homeowners can expect to pay for common CGI roof scenarios. These are real ranges from jobs we’ve done in this market, not national averages.
| CGI Roof Service | Tampa Price Range |
|---|---|
| Full shingle roof replacement (CGI Sentinel), 1,800 sq ft ranch | $8,500 - $12,500 |
| Full tile roof replacement (CGI TileGuard), 2,200 sq ft two-story | $16,000 - $22,000 |
| Metal roof installation (CGI StormClad), 1,600 sq ft | $13,500 - $18,000 |
| Partial repair: ridge cap section, 20 linear feet | $650 - $1,100 |
| Underlayment replacement under existing tile, 1,000 sq ft | $3,800 - $5,400 |
What moves the price: roof pitch (anything over 6/12 takes longer and costs more), deck condition, single-story versus two-story access, and whether the existing roof has one layer or two. Permits in Tampa add $200 to $450 depending on scope, and we pull them, pass inspections, and close them out. Call (386) 559-6999 for an exact quote. Estimates are free, and there’s no trip charge if you’re in our home county.
Why Tampa Homeowners Call Winslow Windows & Doors for CGI Work
Ed Winslow started this company in 2011, and his name is on the door, literally. We’re the locally owned alternative to the national chain that sends a different subcontractor every time. When you call us about a CGI roof in Tampa, you talk to someone who knows CGI systems and knows Tampa weather. We’ve worked roofs from quiet bungalows in Seminole Heights to bigger remodels near the Riverwalk, and Ed signs off on every job before the truck pulls out.
The 36500-Day Done Right Promise means if we don’t do it right, we come back and make it right. That’s a 100-year standard, and no national outfit will put that in writing. We’re also authorized installers for PGT, CWS, ES Windows, and ECO Window Systems, so if your Tampa home needs impact windows or doors to match the roof work, one crew handles it without you chasing four companies. Background-checked, uniformed techs arrive at your door. Upfront pricing. No surprises on the invoice.
FAQs
Most full CGI roof replacements in Tampa take 3 to 7 working days once materials arrive and the permit is issued. Tile and metal jobs run longer than shingle jobs due to material weight and install time. Call (386) 559-6999 and we’ll give you a realistic timeline for your specific roof, not a generic promise.
No, using an independent installer does not void a CGI material warranty as long as the installation follows the manufacturer’s install specifications. We install CGI roof systems to their documented spec, and we keep photos and records for warranty claims. If a warranty question comes up, we handle the paperwork with you.
We do both. If the deck is sound and the failure is isolated, a targeted repair makes sense and we’ll tell you that. If the underlayment is delaminating across multiple slopes or the roof has 15-plus years on it, a full replacement is usually the better money, and we’ll show you why with photos and numbers before you agree to anything. Either way, estimates are free.
It covers our workmanship on every CGI roof replacement and installation we do in Tampa. If something we installed fails because of how we installed it, we come back and fix it. Period. That promise belongs to Ed Winslow personally, not to a corporate legal department.
No, you don’t need to be home. But we appreciate it if you can do a final walkthrough with Ed at the end. Most Tampa homeowners like to see the finished roof up close before we pack up the tarps. If you can’t be there, we send photos of every phase and you only sign off after you’ve seen everything.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Tampa and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.