Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterPGT Windows & Doors in Tampa, FL | Winslow Windows & Doors
We provide independent PGT window and door service across Tampa, from South Tampa bungalows to Carrollwood ranches. What makes our PGT work different here comes down to one thing: we understand how Tampa’s CBS block homes and Hillsborough County’s permit inspections interact with PGT’s specific product lines. If you need an honest diagnosis or a repair quote, call (386) 559-6999 and a real person answers.
We’re Winslow Windows & Doors, and we’ve been working on PGT products since 2011. We’re not a PGT factory affiliate. We’re a local Tampa company that fixes these windows and doors the right way, with parts that meet Florida code.
Why Tampa Residents Choose Us for PGT Service
Most PGT windows in Tampa live in homes built between 1955 and 1975. That’s the CBS ranch belt: Seminole Heights, South Tampa, Temple Terrace, Carrollwood. Ed Winslow grew up in Miami learning this trade at Miami Lakes Educational Center, then spent nearly two decades measuring, installing, and repairing windows across the Tampa Bay area before opening Winslow in 2011. His crews know the difference between a jalousie conversion in a block wall and a wood-framed retrofit, and he personally signs off on every job before the truck leaves.
We’re the company neighbors call when they need PGT work done without drama. We carry OEM PGT seals, rollers, and balances, and we keep aftermarket Impact Windows - Tampa components on hand for out-of-production models. Our techs arrive in uniform, background-checked, and ready to explain exactly what’s wrong before any work begins. Free second opinions on written estimates, $40 off any repair over $200, no trip charge inside Hillsborough County, and a permanent 10% discount for seniors and veterans. That’s been our standing deal for over 15 years.
Common PGT Windows & Doors Problems We Solve in Tampa
- Cracked or missing impact-rated gaskets on WinGuard units. Direct Tampa sun cooks the rubber gaskets on exposed south-facing windows, and once they crack, afternoon thunderstorms push water into the frame. We replace the gaskets with OEM PGT seals and re-seat the glass properly.
- Galvanic corrosion at steel-to-aluminum anchor points on 5000 Series frames. Homes along Hillsborough Bay and in South Tampa’s salt-air zone get white corrosion at the frame corners faster than inland. We clean and treat the extrusion when it’s salvageable; if the aluminum is compromised, we tell you straight and recommend replacement.
- Seized balance springs in SpectraGuard single-hung sashes. Tampa humidity rusts the coil springs inside the balance system, so the sash slams shut or won’t stay up. We rebuild the balance with OEM or FL-approved aftermarket parts, not generic hardware-store substitutes.
- Fogging between panes on older WinGuard insulated glass units. Constant UV and thermal cycling breaks the factory sealant after 10 to 15 years. When the interlayer is intact, we glaze in a new OEM IGU. If the interlayer is delaminating, that’s a replacement conversation, not a repair.
- Jalousie Florida room panels that fail wind mitigation. Tampa’s 1950s and 60s ranches often have post-original Florida rooms with non-impact jalousies. Those panels are wholly non-impact and must be demoed and reframed to meet Miami-Dade and Florida Building Code standards. We full-frame the opening and install PGT WinGuard impact units that clear the OIR-B1-1802 inspection.
PGT Service in Tampa: What Local Conditions Mean for Your Equipment
Here’s a fact about Tampa that changes how PGT work plays out here, and it doesn’t apply the same way in Orlando or Jacksonville. Hillsborough County requires a permit and a Florida Product Approval (FL#) verification on essentially every window and door replacement. The inspector pulls the FL# off the installed unit and cross-checks it against the permit application right there on site. That sounds simple. It trips up out-of-state contractors constantly. They show up with inventory that was never FL-approved, install it, and then fail inspection. Now the homeowner waits weeks for a reorder while their opening sits unfinished. We pull FL#s before installation even starts, and we confirm them against the permit paperwork on site. A recent job in Seminole Heights illustrates the process: a homeowner’s jalousie Florida room was failing wind mitigation. We full-framed the opening with tapcon anchors and buck framing, installed three PGT WinGuard Horizontal Roller impact windows, and confirmed each FL# against the permit before the inspector’s afternoon visit. The whole job cleared same-day.
PGT Models & Products We Service in Tampa
Our crews work on PGT WinGuard Aluminum Impact, SpectraGuard Vinyl Impact, ClassicVue Non-Impact Aluminum, and 5000 Series Single-Hung Impact units. We stock OEM seals, rollers, and balances for the common lines, and we keep certified aftermarket impact-rated components for discontinued models. That means faster turnaround for Tampa homeowners who don’t want an opening boarded up for a week. As an independent service provider, we’ll never claim PGT authorization. We will tell you exactly which part your window needs and why. For full details on the PGT products we sell and service, see our PGT sales & service page.
PGT Service Pricing in Tampa
Service call and diagnosis typically runs $85 to $150 inside Hillsborough County, and we don’t charge a trip fee within the county. Gasket or seal replacement on a PGT slider or single-hung usually lands between $120 and $280 per opening. Balance spring rebuilds for SpectraGuard sashes run $180 to $340, depending on access. Re-glazing a fogged WinGuard IGU can run $300 to $600 per sash. Full-frame jalousie conversions with PGT WinGuard Horizontal Roller windows typically range from $1,200 to $2,600 per opening for our Window Installation in Tampa, which includes demo, buck framing, tapcon anchoring, and FL# permit verification. Every quote is a written line-item estimate, fixed before work begins. We never send a change order after the fact. Call (386) 559-6999 to schedule a free estimate, and ask about the $40 repair discount if your ticket goes over $200.
Serving Tampa, FL - Our Local Coverage Area
We’re based in the Tampa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Windows & Doors in Tampa
Will PGT impact windows from an independent installer still satisfy Hillsborough County’s wind-borne debris requirements?
Yes, as long as the unit carries a Florida Product Approval number that matches the permit application. We verify every FL# before installation and confirm it on site for the inspector. Call (386) 559-6999 and we’ll walk you through what your specific opening needs.
Can you repair a PGT WinGuard slider where the aluminum frame has white corrosion at the bottom corners?
If the corrosion is surface-level and the extrusion is structurally sound, we clean and treat it and replace the affected seals. If the aluminum is thinning or pitted through, we’ll recommend a full frame replacement rather than a patch that fails next hurricane season. The estimate is free and will tell you which path makes sense.
I have original 1960s jalousie windows in a CBS block wall. Can PGT impact products be retrofitted into those openings?
Yes, but it’s a full-frame job, not a sash swap. Jalousie openings require demo, buck framing, and tapcon anchoring into the masonry before a PGT WinGuard or SpectraGuard unit can be installed and pass inspection. We do these conversions regularly across Seminole Heights, South Tampa, and Temple Terrace. Call (386) 559-6999 for a line-item quote.
Do PGT SpectraGuard vinyl impact windows hold up better than non-impact PGT units in Tampa’s humidity?
Vinyl frames resist humidity better than aluminum in terms of corrosion, but the real advantage is impact-rated glazing built for Hillsborough County’s wind-borne debris region. If you’re replacing non-impact windows, the SpectraGuard line is a solid choice for CBS homes. We’ll explain the differences on your free estimate visit.
How much does PGT window repair cost in Tampa?
Most PGT repairs in Tampa run between $120 and $600 depending on the failure. Full jalousie-to-impact conversions run higher because they involve masonry work and permit verification. Call (386) 559-6999 and we’ll give you an exact number, free, before any work starts.
Service Areas Near Tampa
We service PGT windows and doors across the Tampa metro, including St. Petersburg, Brandon, Riverview, and Wesley Chapel. For PGT work on the Pinellas side, see our PGT service in St. Petersburg page, and for north Pinellas, our PGT service in Clearwater page covers that corridor. If you’re in Hillsborough or nearby, our Tampa service area page has the full geographic breakdown.
Book Your PGT Service in Tampa Today
Call (386) 559-6999 and a live person picks up, day or night. We’ll schedule a free estimate for your PGT repair or replacement, and we’ll show up with the right parts and the right FL# verification. Ed’s name is on the door. Literally. The one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Tampa since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.